Guidelines for Deadbolt Lock Installation
You must be thinking why should you install a deadbolt lock? Certainly, this type of question will pop in your mind because of the cost factor, however it really should be viewed as an investment. A deadbolt lock can provide extra security to your front entrance door and other main entry doors to your home. There were days when an ordinary lock was able to protect your home from burglaries. Today as a result of advanced technology, there are several ways that a thief can enter your home. This is why you should update your home with advanced security measures to keep you and your family away from any potential harm.
Proper installation of a deadbolt lock is equally important to its quality. Here, we will discuss the procedure of deadbolt installation used by a professional locksmith company in order to provide complete security to your home. The steps are as follows:
• First, you must decide the location and position of the deadbolt lock on your entrance door. There will be a cardboard template in the lockset, tape that cardboard template on the marked location. Use an awl to mark drill points.
• Try to adjust the hole according to the cylinder diameter and then drill out the cylinder hole on the door.
• Drill a hole by using a spade for the latch bolt. Make sure the spade, you are using is of correct size. Drill carefully and make the hole that matches the exact size.
• Now, install the latch bolt temporarily and screw it into place. Mark the canter edge of the latch bolt by using a pencil. After this, close the door and use these pencil marks to make another pencil mark on the door jamb. This marked spot will be the center of the strike plate that you will mount later on.
• Next, with the help of a pencil, mark the outline of the latch bolt plate and remove the latch bolt from the door.
• The locksmith will now cut an outline of the latch bolt plate to a depth that makes the plate flush with the door using both a chisel and hammer. This plate will be screwed back into the door.
• Make sure there are no wood chips in the cylinder hole and the latch bolt hole. Clean both holes properly and then place in the latch bolt into the door and after this place the cylinder. Please refer to the installation guide to properly line up the latch bolt and cylinder.
• Lastly, make a hole into the door jamb by using the spade where you are going to place the deadbolt. Mark the door jam with a pencil as the center guide. Now install the strike plate into the door jamb.
Install a deadbolt lock and reduce the chances of burglary.
Author info :
Cheryl Lawner is full time content writer and have sound knowledge about locksmith services for residential and commercial. He is passionate about sharing his knowledge and expertise through his articles. If you are looking for honest, Locksmith Boca Raton Services check out more of my articles. I’m here to help people find honest Locksmith Hollywood
Processing your request, Please wait....
