The Sure Manner to Change a Circuit Breaker
Having a circuit that keeps tripping could be an disturbing difficulty. In fact, it might be enough to have you doing a web hunt for “electrician Oklahoma City”. This might not be necessary, though. There are steps you may take yourself to hook up out a broken circuit breaker for a good one. Read on to find out how.
First Step: Plug a radio into an outlet that belongs to the circuit you’ll be replacing. This will assist you near the end of the project to find out if all is working perfectly.
Shut it Down: First of all, shut off all the branch circuit breakers in your panel, then shut off the main breaker. This is an imperative step to make sure you’ll be safe throughout your repairs. Don’t just believe that it has shut off right – use a voltage meter to make sure that the breaker is not live before you go any farther. Once you’re sure the power is off, unscrew the panel covering your breakers so you could get at the wires beneath.
Prep Your Wires: Locate the breaker you want to hook up. You’ll notice two wires leading into it. Pay attention to the position of each wire – you’ll need to know this later. Loosen the white wire by unscrewing the screw part way. Put a wire nut on that wire and push it out of your way. Follow the same steps for the other wire.
Hook up the Breaker: This part is a piece of cake. Simply pull the old circuit breaker out (you may have to pry it a bit with a screwdriver) and snap the new one into place. Easy!
Reattach Your Wires: Replace the wires you pulled out two steps ago back in the same order. Tighten the screws to make sure they’re secure, then put the cover back in its place. Turn your breakers back on (main breaker first, then branch breakers). Do you hear the radio you plugged in before you started? If so, congratulations! You’ve changed your circuit breaker.
If you find that the circuit you just connected trips immediately after you turn it on, you may want to go ahead and do that web check for “electrician Oklahoma City”. You may have a short circuit, which is a difficulty you definitely want to have an electrician take care of. Don’t try to fix the dilemma on your own, or you may end up causing farther damage to the electrical system or yourself.
Replacing a broken circuit breaker is one of those electrical projects that are easy and safe to take on by yourself. Make sure to take the proper safety precautions before you begin, and you’ll be on your way to taking care of the predicament.
Before you get too far fixing your breaker, dig up more about Electrical Components – The Best Brands to Use at electrician Oklahoma City
Processing your request, Please wait....
