From the perspective of how to operate the production line to improve performance linkage Binding – Perfect Binding, binding – Printing Industry
Present, binding the industry has basically eliminated the hand-set package of the peace process, moving from a single perfect binding line of the transition to perfect binding linkage. Perfect Binding linkage line advantages of its advanced technology is increasingly being used. But many businesses Binding linkage line and can not fully achieve its full performance, analyze the causes are mostly subject to human interference.
Point increase from the operation of the production perfect binding line performance linkage ( HC printing network With map)
Print Network HC At present, the binding of the industry have basically eliminated the hand-set package of the peace process, moving from a single perfect binding line of the transition to perfect binding linkage. Perfect Binding linkage line advantages of its advanced technology is increasingly being used. But many businesses Binding linkage line and can not fully achieve its full performance, analyze the causes are mostly subject to human interference.
1. Previous working procedure to comply with the technical requirements, to reduce unnecessary loss of working time Binding linkage lines
finishing applications Print Goods in the Design Production and printing processes must strictly follow the relevant technical requirements. At design time, pay attention to weight and finished paper size format. With 80g / m 2 Offset book paper folded into 32 Folio posts, after milling behind the mouth has not cut off size. This is because the book too thick paste, milling back great depth caused. If the pre-press in mind that we can avoid problems.
Printing shop in the processing of relatively large print version of heart products, in order to save paper without cutting edges, resulting in chaos rules the book closed, so bookbinder not work. Coated or glazed sealed in the book, due to improper temperature control, resulting in the book seal adhesion, binding to linkage line frequently when parking.
Caused by human factors such as perfect binding line linkage loss of working time, are due to front-line processes linked to the perfect binding process requirements caused by insufficient understanding. These issues only from the binding line can not be solved, which requires front-end process specifications, and linkage with the perfect binding lines with science in order to prevent such problems.
2. Based on binding production lines, providing perfect binding line of the adaptation of the conditions linked
Book posted uneven wear, back Alice, did not exhaust mechanical and manual strapping, adhesive lined pages will cause high adhesion, etc. Page machine with Frequent parking. Therefore, the address books can be posted flat service performance of production lines to improve performance of the entire linkage.
(1) folding must be perforated exhaust
Living conditions should not use hand-folding. If the fold by hand to exhaust, and as the tie and mechanical folding book key Sarkozy tied tight. If the book does not quote the best in the exhaust will cause a page not open or milling milling open enough.
(2) two posts to paste the following book
In the production of two or a single page if not adhesion, this page will be in the running to float. If the post for the previous version or the last version of this page to send books to float after the board would get stuck, causing parking.
(3) All books posts must be bundled or stacked flat pressure
Compacted pile must pay attention to the DPRK in the back yards of Qi. If you can not time on the machine, but also in every one live piece on the pressure plate to prevent bending the top ShuTie wrinkle. Bundled live pieces back the same code also homogeneous.
cnc-machiningparts.com offers high quality suppliers and high quality products, such as PEM Fastener , Machined Parts Manufacturer machining parts supplier for domestic and oversee buyer. To know more information, please visits http://www.cnc-machiningparts.com/
Processing your request, Please wait....
