Some Info On Nail In Anchors
Doing diy is not as simple as purchasing a few nails, screws and bolts and going mad. You need to do it properly or you will just create much more work for yourself. One of the tools available to you is nail in anchors. Nail in anchors are widely used to secure heavy things around the house, or shop items, to partitions. They can be used on brick, hollow cement blocks and plaster.
I am told there are twenty five different kinds of nail in anchors available. Each one with a slightly different speciality. All of them have different sizes, are made of different and type. They can be anywhere from 25 to 135 millimetres long and between 5 and 8 millimetres in diameter. They can also have either plastic or nylon sleeves.
Two of the most popular nail in anchors are the square rim and countersink. The former is mostly used on sheet metal and other flat surfaces. The countersink nail in anchors are used when you need the nail head to be flush with the surface area you are putting it in.
The procedure involved in inserting a nail in anchor is rather simple. You need a drill bit of the correct size, a little larger than the nail in anchor itself, the anchor and the two surfaces you wish to join.
First you need to drill the holes. You can elect to drill a hole into just the supporting surface or in the object too. This latter usually saves a lot of time and effort. You then insert your nail in anchor’s sleeve. Then its a simple matter of placing the nail and then hammering it home.
When you’re choosing you nail in anchors, make sure you select the right one. Pick one which will be of sufficient length to support the burden of the object you will be fixing to the wall. If it is way too short, the weight will cause it to pull out of the wall. Take care not to get one that is too long though. You do not want to end up drilling into the electrical wiring or plumbing of your home. It is possible to ask for help in choosing the right measurements from the staff at the local diy store, they ought to be able to help you select the right one. Additionally you need to know whether they will likely be indoors or outside. Plastic tends to become fragile and break when it is exposed to the sun and rain for a long time. Which means that if you intend on hanging something outside, you should opt for nail in anchors with a nylon sleeve. If you are not sure which one you have got (if you’re anything at all like me, you have a dozen of the things lying in a drawer somewhere and you’ve got no idea what kind they actually are) put the sleeve into water, plastic will float, nylon will sink.
Nail in anchors are extremely useful things to have around the house as they are easy and efficient to use when hanging decorative mirrors or nailing down skirting boards, so do yourself a favour a go out and buy a few different types to cater for most eventualities and diy jobs
For more information about nail in anchors visit the website http://www.eurekadiy.ie
Processing your request, Please wait....
