All About Expansion Bolts
The first concern which comes to mind when someone mentions expansion bolts is “What is an expansion bolt? “. The next is along the lines of “What is an expansion bolt for and just how does it work? “. This article should answer some of these questions for you.
An expansion bolt consists of a bolt, nut and a sleeve. Your sleeve expands when the bolt is tightened. They’re much like nail-in anchors but are able to handle much more challenging usage such as podiums and stadium seating. There are a few types of expansion bolts out there. A definition from the mechanical engineering point of view is as follows: an expansion bolt is a bolt and nut configuration that expands when tightened into a hole.
The very first is the bolt, lead sleeve and tapered nut combo. The nut is inside a lead sleeve and then the entire thing is put into a hole previously drilled into the material that needs to be fastened. The bolt is then fastened and the nut is pulled up towards the bolt head and this makes the lead sleeve broaden and tighten in the hole.
Then there is the bolt, lead sleeve, metal cone and nut collaboration. The cone and sleeve lay on the bolt assembly. As the bolt is tightened, it pushes the metal cone into the sleeve which once again causes the sleeve to broaden and hold the equipment in position.
The common element is the lead sleeve. It will be this that basically facilitates the expansion and allows the bolt to stay in place. The sleeve also protects the bolts and also the material from breaking from too much pressure. Additionally , it decreases the chances of the bolt getting ripped out or stripped.
Expansion bolts are rated on the tonnage they are able to handle. They should be chosen according to what use they will be put to and what type of stress they’ll be under as well as what type of corrosion should be expected.
One of the more common uses that can be found and understood by just about anyone, is in the protection on climbing routes on cliffs and mountains. The expansion bolts are generally put in locations that are likely to have accidents occur to provide anchors for the climbers to connect to.
So, expansion bolts are not that complex. They basically consist of a bolt in a sleeve that expands when the bolt is tightened. The expansion helps make the bolt stay more firmly within the hole. The sleeve protects the bolt as well as the material it’s being inserted into. Expansion bolts can be used during the construction of podiums, long term scaffolding, seating in stadiums and security on mountain climbing routes.
They’re simple enough to use, you just need the correct drill bit, no more than only a little larger than the bolt head itself and then the bolt. Drill an opening in the material, insert the bolt and fasten it. Take care not to over tighten it as that could cause the head of the bolt to get stripped rendering the bolt extremely tough to remove, or even impossible.
For more information about expansion bolts visit the website http://www.eurekadiy.ie
Processing your request, Please wait....
