Your First Guide To A Sportspower Trampoline
So you got a Sportspower trampoline for Christmas? That’s good news. But we all know how hard it can be to install your brand new trampoline.
Luckily this article will help you figure out the easiest and fastest way to install it. Before we start make sure you have plenty if working work. It helps to build the trampoline where it will be used too. This way you do not have to move it around and exhaust yourself doing so.
First step is to ocate the indented mark on the extension legs of the trampoline. The extension legs of the tramp are already attached to the trampoline so this is very easy for you already. The indented mark is twenty-four inches off the ground so you do not need a ruler to assemble the Sportspower trampoline
Next just start by aligning the bottom of the lower frame tube with the indented mark on the extension legs.
After that it is a good idea to position a gap spacer between the lower frame tube and the extension legs. This will help assemble and make the frame stronger on your Sportspower trampoline. This will be easier for your.
Next step is to go ahead and place a U-screw around the lower frame tube, the gap spacer, and the extension leg and secure it with a clamp and a lock nut. This makes sure everything is safe and sturdy, and will not collapse later.
Now you can finally go ahead and over the ends of the U-screw with two screw covers. As you do that make sure to attach another U-screw with a gap spacer about eight inches above the first U-screw and secure it around the extension leg and lower frame tube with a clamp and a lock nut. This prevents the frame tube from coming out. We don’t want that!
Now go ahead and attach the five remaining lower frame tubes to the extension legs at the indented mark, with the two U-screws on each lower frame tube. You did one already so it will be easy. Indented marks are located only on the right leg of the extension legs on all Sportspower trampolines. But you already knew that, right?
Next steps go very fast – hang in there you are almost done. For every leg you will slide each lower frame tube into an upper frame tube. After that slide each right horizontal tube into a left horizontal tube. So keep in mind that as you use a screw to secure each right horizontal tube to the left horizontal tube into your Sportspower trampoline.
No go ahead and slide each right horizontal tube and each left horizontal tube into the upper frame tubes to form an arch. When finished, you will have three arches. These support the trampoline safety net on all Sportspower trampolines.
With that all done, your Sportspower trampoline is all set to go! Congratulations and have a great time exercising.
Sportspower trampolines are a very good deal.
Processing your request, Please wait....
