Tips For Preventing Motor Oil Or Other Chemicals From Leaving Gross Stains On Your Garage Floor
I’ve done quite a few articles on garage floor coverings and coatings, but I realize that a lot of people can’t afford to buy such things on a whim. Unfortunately, it’s those people that don’t have a lot of money that tend to change their own oil, which is probably the easiest way to stain your garage floors. Personally, I once had a Subaru that had this wonderful plastic cover whose bolts went up behind the bumper cover, going over the drain bolt. They were nice enough to leave a hole to get to the bolt, but unfortunately the oil did not drain in the direction that they must have intended, because I generally ended up with an overhead oil sprinkler. Great fun.
Preventing Stains
Now, I probably should have just paid for a garage floor mat to park it on or, if nothing else, a small compartment mat just for changing the oil, though there may not be a compartment mat big enough to contain this kind of mess. Regardless, the end result was a very gross, very stained floor.
Clean The Spill ASAP!
One of the main things you can do to help remove the stain is to remove the oil as soon as you can once it spills. Believe me, the longer it’s sitting there, the harder the stain will be to remove. Have a roll of paper towels or stack of rags for this purpose, and you’ll be glad later. Don’t think that only a small amount of oil is safe, either, because even a little dot will make a bigger, darker stain the longer it is left on the concrete. This is because concrete will soak up anything liquid like a very slow sponge, but a sponge nonetheless. There are products that are designed to soak the chemicals up, often called concrete crystals or something similar, but those can get very expensive very fast if you’re very spill-happy. If you can afford them, though, they would certainly help since they will absorb much of the spill, but never all of it. To use them, you just set them on and in the spill for however long they’re supposed to sit, then sweep them with a broom that you don’t mind getting nasty, and throw them away. I’ve heard people say they use kitty litter, and I did try that, got the type that doesn’t clump and everything, but I still ended up with stains and some really gross, gummed up kitty litter.
You Can Always Try Garage Floor Stain Remover…
For some garage floor finishes, yes. Although I haven’t used many, the general consensus is not good for most garage floor stain removers. Most anyone will tell you that they only sometimes work, and none of them work on everything. Even the ones that do the best job usually leave a lightly colored stain in your concrete garage floor, and I, personally, don’t feel like that’s worth it. You can usually pick up a small bottle of the stuff for about ten dollars, but if you have a really big oil spill, you might need to aim larger.
If You Just Can’t Remove That Garage Floor Stain…
If all else fails, your next best bet will be to use a garage floor covering. This can be pretty expensive. You might be able to do an epoxy garage floor coating after you’ve cleaned the stains with stain remover, but that totally depends on the garage floor coating’s directions. You can always, instead, buy a mat, or snap-together garage floor tiles, and never worry about the existing stain or future stains, since garage floor mats and tiles are both stain resistant. If you have a big, persistent stain, avoid peel and stick garage floor tile as the adhesives tend to break down if they touch any other chemical. That oil may be stubborn about going anywhere when you want it to, but it’s great about ruining any garage floor finishes.
Visit Sweet Garage Floor for more information about every kind of garage floor out there.
Processing your request, Please wait....
