Bollard Lighting
Bollard lights receive their name from the obvious assumption, that is to say that a bollard is something which encloses a source of light.
A nautical term, bollards, means a metal post utilized to tie ships up at dock. Bollards are usually cylindrical with a round top; however, the term can be used to refer to any vertical post which is used to separate one area from another. Most of them are found in Car Parks and on paved areas to prohibit people from parking cars on them.
Lighting bollards are frequently found in protected public areas such as parks and gardens in order to light up the walkways or to make the area’s borders more clear, and these can be found in various forms and sizes, including round, flat or different shaped tops.
They must be waterproof for use outdoors. IP (Ingress Protection) ratings are utilized to specify their levels of protection. The minimum acceptable level of protection is IP44; but for areas which are more exposed, a rating of IP65 is suggested.
The light fixtures are placed close to the top of the bollard, typically in back of metal slats or inside a polycarbonate luminaire. Currently it is a good idea to equip the luminaire with energy saving light bulbs. Because the bulb can’t be seen, it’s possible to utilize the spiral forms that are less costly.
A few bollards have directional lighting and may be utilized to light up an architectural characteristic, but, usually, the light will be evenly distributed in a round molding around the bollard.
Colored bulbs, even low energy ones, can be used to create effects in Bollard lights. One example of this is that a hotel car park might look really modern with blue bulbs; however, a green light bulb might be wonderful to improve the foliage of plants.
Rust Free Aluminum or Stainless steel tubing is utilized in the construction of Bollard lighting. Some are made of plastic material that is resistant to the weather conditions, but these types are practically more sensitive than the types constructed of stainless steel. The metal tube consists of a die molded base that’s fastened to either a proper piece of concrete, a wooden deck or possibly incorporated on surfaced roads. The luminaire – generally made out of die cast metal – sits on top.
A qualified electrician must install bollard lighting, which generally uses 240 electrical power and must be grounded. Although it’s possible to use solar energy, it is normally utilized in countries that usually have high amounts of natural sunshine, including countries such as Spain, Italy and South Africa.
Light Emitting Diode lit bollard are the latest energy saving fad. LED lighting normally lasts about 10 years or even more and does not need to be replaced. Furthermore, a very minimal amount of electrical energy is utilized. While they might cost more to start off, with they will be less expensive over time.
It’s important to be able to tell the difference between the lower quality varieties that cost less than ?50.00, are normally not made to last very long and are generally made out of very thin steel (1mm) or less, from the more costly varieties that cost around ?80.00 to over ?300.00. Usually the professional types are composed of aluminum that is about 2.5mm thick and they are strong enough to hold up in all types of weather. They can even withstand an occasional accidental bump by a lawnmower!
Because lights may be put out by little rocks thrown up by lawnmowers, it’s a good idea to buy a type which is easy to repair with easily available spare parts.
Please click the following link for additional information on bollard lighting ==> Bollard Lighting
Processing your request, Please wait....
