Tips To Installing Carpet The Right Way
Nowadays, getting professional help could be really expensive so we try to do different tasks on our own, specially when it comes to home improvement. One home improvement task we can try doing ourselves is installing carpets.
Below are lists of materials and tools you will be needing, and basic instructions about installing carpets.
Here are the materials you will need:
Carpet
Nails
Screws
Carpet pad
You will also be needing these tools:
Hammer
Tack strip cutter
Knee kicker
Trimmer
Power stretcher
Staple gun
Carpet seam tape
Carpet knife
Before starting the project you have to make sure all the materials and tools needed are complete. Follow these simple steps to properly install your carpet.
Measure the room – Before doing any purchasing and cutting it is always best to first do the measuring. It is important that you measure both length and width in order to determine the needed carpet size.
Prepare the floor – Make sure that the floor is cleaned. Ensure that the floor is undamaged by checking for squeaks. You will have to repair any damaged areas you find. If left alone, these areas will ultimately damage your carpet.
Install tack strips – Place tack strips parallel to wall edges. Do not install them in front of door openings. The tack strips should be consistently around ” from the walls or baseboard.
Install the carpet pad – In order to protect the carpet and give it cushion you must install a carpet pad. Starting along one wall, roll out your carpet pad or carpet cushion. You have to make sure that you overlap the tack strips a few inches. Make sure you have no wrinkles in your pad. Bunching can be prevented by taping the seams. Stop about every 2 feet to thoroughly staple the padding. When the carpet pad is secured, use a carpet knife to cut the excess padding along the tack strips. Make sure that the pad do not overlap the tack strips.
Install the carpet – Same as installing the carpet pad, roll out the carpet along one wall making sure you leave an excess of about 3 to 4 inches that should overlap along the walls. When multiple sections are needed you will need to make a seam. You can do this by placing seam tape under the seam. In order to melt the adhesive on the seam tape, fastening the carpet ends, you can use a steam iron.
Tack the carpet down and trim – Don’t trim the ends of the carpet before you have tacked it into the space left between the tack strip and baseboard. Use the knee kicker to install the carpet to the tack strip. The carpet can be stretched over the tack strips using a power stretcher. Now the carpet may be trimmed, use your carpet trimmer and trim only the extra along the wall. The edges of the carpet need to be tucked with the stair tool now. You can’t neglect the doorways; prevent fraying by installing door edge strips.
Now that the carpet has been installed, make sure you vacuum it.
Follow certain steps in order to make carpet installation easy and fun. You have to use the right materials and the appropriate tools to achieve the result you are looking for.
Read more about Tips To Installing Carpet The Right Way at this free article directory whete you can find a lot of free articles on different topics
Processing your request, Please wait....
