Working With Drill Bits For A Wall
Lots of people find it easier and cheaper to do their basic around the house fittings by hand instead of getting a professional to do them. There is nothing wrong with this particular approach, but certain care needs to be taken when you are drilling holes in walls.
It’s not as simple as getting drill bits for a wall and just generating a hole within the plaster. You have to think about a number of different aspects.
The first is the position of the hole. If you can see the spot that the bricks meet, it is a good idea to drill there. Drill bits for a wall handle the softer brickwork much better than the much denser brick. You’ll stand less chance of blunting your drill bit or causing damage to your drill.
You also need to think about the depth of the hole. Don’t drill to deep. Many walls incorporate electrical wiring and drilling might damage these if the drill bits for a wall go far too deep and hit a wire.
Then you need to use the correct type of drill bits for a wall. In order to decide what type of drill bits for a wall you need, you should know what type of material you are likely to be drilling into. A drill bit that may handle plaster may not be able to handle concrete or brickwork, whilst a drill bit which is too thick or too rough could cause a lot of harm to the surrounding areas.
How much pressure must you place on the drill? You will need to put enough pressure on the drill to keep the drill bits for a wall in place, but not to use all of your strength as that could break the drill bit or even the drill itself.
Make use of the right kind of drill. The very best drill is a hammer drill. Simply because a standard drill slices into fibrous material while a hammer drill uses a mixture of two actions – hammering to break the aggregate material and also scooping out the bits that break loose. This is why a typical drill works better for materials like wood while a hammer drill works more effectively for man-made substances.
And the right kind of screws. The screws you employ have to be sufficiently strong to handle the weight that is going to be placed on them or they will either break or pull loose from their moorings.
You also have to remember to protect yourself correctly. Dust and debris can easily end up in your eyes and lungs, therefore you should wear safety goggles and a dust mask to shield yourself from this. It’s also an extremely noisy operation and it is a good idea to wear ear plugs to protect your delicate ear drums from the noise.
So, as you have seen, using drill bits for a wall is not as easy as attaching the drill bit to any old drill you’ve got lying around and running riot with it. You have to be careful about the place you drill and how deep you go and you have to protect yourself from the inevitable debris and noise.
For more information about drill bits for wall surfaces visit the website http://www.eurekadiy.ie
Processing your request, Please wait....
