Hardwood Floor Refinishing – Diy Tips
If you’re lucky enough to find wood flooring hiding below your tired carpeting, you could possibly feel like in the wood backup. That’s understandable because refinishing the floors yourself might appear to be an impossible task.Hardwood flooring were a typical feature in houses prior to the 1960s. Before that, having wall-to-wall carpet was considered extra upgrade. From the 1970s on, most homes had wall-to-wall carpet in just about any room. However, tastes change, and over the last couple decades, wood flooring have once again become fashionable and desirable. Oftentimes, when I’m talking to someone about fixing houses, they ask if refinishing hardwood floors is a thing they can do themselves. Unless anybody has a physical reasons why they can’t undertake it, I generally say yes. However, Furthermore, i remind them that redoing hardwood floors takes a considerable time, sweat, and determined effort.
As a general rule, floors of fifty square feet or less can be sanded by hand, however for any floor greater than that, rent or get a small orbital sander. Everything necessary for doing it yourself will be available at your local hardware store. You should buy a pretty good electric sander nowadays at under $100, which can be a good investment, especially if you’re planning to work on the home often.The first layer to become removed is usually a thick wax coating, then a coat of either polyurethane or varnish. Much duty commercial wax stripper can get rid of the wax, and a lacquer thinner or acetone may be wiped on prepare the wood for an additional step. If you can find any carpet tacks or components of old nails in the wood, take them out first. The remnant of your nail can tear up sandpaper, damage a sanding pad, and do serious problems for the palm of your respective hand, check carefully to be sure all remnants of tacks and nails are gone before you begin sanding. Fill all nail holes using a quality wood filler, matching the colour as closely as you can, and allow it to dry. Then you’re ready begin sanding the floor with 220-grit sandpaper, whether personally or using a sander.
When you’re done sanding, wipe your entire floor with a damp cloth to take out as much sanding dust as it can be. Damp cloths are better than floor cleaners. Let the floor dry, and then wipe it again having a tack rag, the cloth impregnated with resin to pick up fine dust particles. Again, the local hardware store will have what you need.Following your floor will be as clean as you can get it, apply three coats of polyurethane which has a paint pad, allowing each coat to dry thoroughly, lightly sanding with 220-grit paper, and wiping the bottom with a damp cloth plus a tack rag between coats. If you prefer an old-fashioned finish, use a 50/50 mixture of linseed oil and mineral spirits after which wax the floors with beeswax or paste wax. Take caution with the chemical mixture and also the rags simply because they can become popular fire. It is possible to refinish hardwood floors yourself. All it requires is time and effort–and a fantastic set of kneepads wouldn’t hurt, either!
When you finish, you will have a gorgeous floor being proud of and ready with the next “do it yourself” project–perhaps the subsequent room with hardwood floors.
To find out more, you can visit our best laminate flooring reviews and floor tiles installation website.
Processing your request, Please wait....
