Jin announced in 2009 a quarter of product quality supervision and spot check re
Shanxi Province Quality and Technical Supervision issued in 2009 Q1 results of product quality supervision and spot checks, Shantou Chenghai warm plastic products, Yongkang Bangda Industry and Trade, Foshan South leopard Industry, Zhongshan Vilan lighting, Huizhou NVC lighting technology, Omar fitness equipment failed to light!
Daily insulated: more than half fail
The total of 15 batches of daily supervision and spot checks were insulated, qualified seven batches, the passing rate of 47%. Failure mainly thermal performance and capacity tolerance. Insulation performance does not meet the standard requirements of daily thermos or mug, in a certain time, cold water will not reach the insulating effect; capacity of tolerance failure is the thermos does not match the capacity and express. U.S. special good from the Shanxi Co. supermarket chain store distribution of the identified riparian Shantou Chenghai Plastic Products Co., Ltd. produced a warm cozy 2000ml type hot and cold insulated, the heat tolerance performance and capacity do not meet standards. Lane roadway from the Taiyuan City, supermarkets and distribution of marked Industry and Trade Co., Ltd. Yongkang production of Dr. Banda wide-mouth pot 1.8L, insulation performance does not meet standards.
Energy-saving lamps: safety can not be bad
The total of 20 batches of energy-saving lamps for the supervision and spot checks, pass in 11 batches, 55% pass rate. The results of this random inspection from the view, the market in Shanxi Province Sell Poor quality of energy saving lamps, passing rate is not high. Lamp power failure mainly to prevent electric shock, and mechanical strength. Lamp power consumption determines the energy-saving lamps, the actual energy consumption of power on behalf of product size, power, value and products marked difference between the value of the smaller, higher production accuracy. Yi Cheng from the Taiyuan Electronic Firm distribution of marked leopard Industrial Co., Ltd. Foshan City, south of Lang Si production license YPZ220 / 9-type energy-saving lamps, lighting Taiyuan good light distribution of labeled Zhongshan City Lighting Co., Ltd production of Cody Vilan brand 9W energy saving lamp, the lamp power not meet the standards. Prevention of electric shock is the energy-saving lamps one of the most important safety indicators, in order to ensure that the user normally does not occur when using or installing an electric shock hazard, require the standard lamp Screw lamp, the lamp on touch not live metal parts. The spot checks by the Shanxi Silver Ruike Trade Co., Ltd. Huizhou marked distribution of NVC lighting technology Co., Ltd production of NVC card YPZ220/15-S27 energy-saving lamps, the electric shock of not up to standard requirements. Mechanical strength is also an important energy-saving lamp safety indicator, lamp and light the main body is to be assessed whether the strong adhesion. If the lamp off, leading to leakage of internal live parts, you can not guarantee the safety of users. The spot checks by the Beijing Hualian Supermarket Co., Ltd. of Taiyuan store distribution of marked victory Hetang Jiangmen City Temple Lighting Factory production of 1 million preferred brand YPZ-2U-5 type energy saving lamp, its mechanical strength not meet standards.
Treadmill: careful injured finger
This total of 15 batches of fitness equipment treadmill for a random inspection, qualified 12 batches, 80% pass rate. The main problems: First, the external structure of individual products can pinch, shear, and rotating parts, moving parts do not meet minimum distance standards. Standard provides that "the height of 1800mm the following activities can reach activities with neighboring parts or fixed parts of a minimum distance of 60mm; if only endanger the finger, then the minimum distance of 25mm." Checks found in the electric running of individual production machine moving parts in the folding treadmill, open the hand with the relative distance between the fixed component is less than the specified minimum distance standard 25mm, easy to hurt your fingers. Second, the signs and descriptions of individual products do not meet standards. Signs and instructions for consumers to understand the importance of product information, product ID labeling is not standardized, the inconvenience to consumers. Cause failure is mainly due to some manufacturers Management Low level of strict quality control, the assembly did not perform rigorous testing before and after the procedure, test not strict; some enterprises have paid insufficient attention to the product identification label. Long Trading Co., Ltd. from the Taiyuan Guang Ming Aoma distribution of the standard fitness equipment Manufacturing Co., Ltd. Production of OMA OMA-006M brand electric running machine, its external structures, signs and instructions do not meet standards
I am China Quality Dress writer, reports some information about precision steel strip , galvanized steel strip.
Processing your request, Please wait....
