Contamination control – 4E1+1Gigabit PDH Multiplexer – 16-channel optic video mu
Function
The aim of all contamination control activities is to permanently ensure a sufficient level of cleanliness in controlled environments. This is accomplished by maintaining, reducing or eradicating viable and non-viable contamination for either sanitary purposes or in order to maintain an efficient rate of production.
Usage
One of the most common environments that incorporates contamination control into its standards protocol is the cleanroom. There are many preventative procedures in place within the cleanroom environment. Procedures include subjecting cleanroom staff to strict clothing regulations, and there is often a gowning room where the staff can change under sterile conditions, so as to prevent any particulate from entering from the outside environment. Certain areas in the cleanroom have more stringent measures than others. Places such as packaging areas, corridors, gowning rooms and transfer hatches incorporate strict contamination control measures in order to keep to the cleanroom standards.
Contamination control is also an important asset to laboratories in industries such as the pharmaceutical and life science sectors. Other places of use include automotive paint shops, entrances to industrial kitchens and food service providers, many manufacturing areas, and in electronic component assembly areas.
More recently contamination control has been a concern for laboratories and other sensitive environments as an effective bio-security crisis management measure. Some banks and insurance companies use contamination control products as part of their disaster management protocols. Preventative measures are put in place as preparation for potential pandemics or the proliferation of biohazards in any potential terrorist attack.
Types of contamination
Beside of particulate matter, the most common type of contamination, ions and molecules (AMC) there are many types of organism that are potentially detrimental to processes in a critical environment. Seven of the most common contaminants are:
Aspergillus niger
Burkholderia cepacia
Clostridium difficile
Escherichia coli
Methicillin Resistant Staphylococcus aureus (MRSA)
Pseudomonas aeruginosa
Salmonella enteritidis
These, and many other damaging contaminants can infiltrate critical areas in a manner of ways. Particulate can enter by air, foot, or on any carrier between the external environment and inside the critical area.
The effects of contamination.
Contamination poses a significant risk to technical processes of experiment or production as well as to the individual. Unguarded proliferation of contamination can quickly lead to product damage, yield reduction, product recalls and other outcomes highly detrimental to businesses. A number of products over a range of industries are recalled due to ineffective contamination control systems.
By this evidence it could be argued that many businesses are not adequately protecting themselves from the harmful effects of contamination, and many products over many industries are being recalled due to unsafe manufacturing processes.
Types of contamination control
Body movement causes contamination and protective clothing such as hats, cleanroom suits and face masks are basic forms of contamination control. Apart from people, the other common way for contamination to enter is on the wheels of trolleys used to transport equipment.
To prevent airborne contamination, high efficiency particulate air (HEPA) filters, airlocks and cleanroom suits are used. HEPA filtration systems used in the medical sector incorporate high-energy ultra-violet light units to kill off the live bacteria and viruses trapped by the filter media. These measures restrict the number of particulates within the atmosphere, and inhibit growth in those that are viable.
Studies by 3M show that over 80% of contamination enters the cleanroom through entrances and exits, mostly at or near floor level. To combat this suitable flooring systems are used that effectively attract, retain and inhibit growth of viable organisms. Studies show that the most effective type of flooring system is one of polymer composition.
Polymer mats are particularly effective due to their suppleness as they allow for more contact with serration on shoes and wheels and can accommodate for more particles whilst remaining effective. An electrostatic potential adds to the effectiveness of this type of contamination control as it holds particles until being cleaned. This method of attracting and retaining particles is more effective than mats with an active adhesive coating which needs to be peeled and is often not as supple. As long as the tack level of the mat is greater than the donor (foot or wheel), the contamination touching the surface will be removed. Very high tack surfaces pose a contamination threat because they are prone to pulling off over-shoe protection. Polymeric flooring is produced to ensure a higher level of tackiness than the surfaces it comes into contact with, without causing discomfort and potentially damaging tickiness.
See also
Cleanroom
HEPA
Decontamination
References
^ Emerald: Article Request – Foreign bodies cause most recalls
^ Dycem Ltd
^ The Role Of Polymeric Flooring In The Control Of Particulate
^ http://ask.technopharm.de/index.php5?id=1059420&Action=showProduct&bmp=10111
^ Cleanroom and contamination control forum
^ Shield Medicare – Frequent Questions
^ Cleanroom Technology – Current industry news and reports
Cleanrooms in Ireland
The Global Society for Contamination Control (GSFCC)
Categories: Hygiene | Security | Safety | Civil defense
I am an expert from fiber-optic-multiplexer.com, while we provides the quality product, such as 4E1+1Gigabit PDH Multiplexer , 16-channel optic video multiplexer, TDM over IP,and more.
Processing your request, Please wait....
