Your A3 Printer Along With The Material This Uses
The most common utilization for an A3 printer is in producing labels. That is why, hardly any folks have in fact made use of or even come across A3 printers. Now you have an article that gives a small amount of information about that A3 printer.
There are two fundamental alternatives for using an A3 printer. Direct thermal as well as thermal transfer. The difference is in how the design is actually printed on the label material. Which means that there are distinct operating procedures for each one as well as specific specifications the material it’ll print on should adhere to. If these specifications are not fulfilled it is possible that adequate damage might be done to the print head over time to demand that it be replaced sooner than it should need to be.
If you are planning to b doing direct thermal printing then the following should be mentioned:
The surface coating of the material getting printed on must adequately cover the heat activated covering to make sure that the printer head does not get harmed in the printing process. If the covering is too thin the printer head might be exposed to small explosions which result from the chemical response brought on by the heat. This may cause pitting and the print head is quickly damaged to a point where it can no longer be utilized and also has to get exchanged.
The surface of the material should be smooth to avoid abrading the actual printer head.
Additionally look for material which necessitates the lowest heat possible. The constant cooling and heating of the print head might compromise it. Additionally, it may have an effect on the quality of the actual printed materials if too high a heat is needed because the print might smear if it is not left to cool down sufficiently prior to being moved and handled.
As far as thermal transfer printing is concerned, the material that’s best will depend on what you intend to print and also the A3 printer you’re utilizing. You can ask the manufacturer of the particular machine what specifications this manner of use requires before you go ahead and do any printing on it.
For more information about an A3 printer visit the website http://www.colourcorp.co.za
Processing your request, Please wait....
