Portable Table Saws – 5 Tips For Perfect Rips
One of the best tools to have for home renovation projects is a portable table saw. The portable saw and table saw table are essential to every carpenter for clean, straight cuts to give that clean finished look at the end of the job. Here are some important tips for buying and operating a portable table saw.
The standard 10 in table saw comes with a 10 in carbide tip blade. This is adequate to crosscut a 4×4 piece of wood. One change that can be made to give more versatility is to switch to a 40 tooth combination blade. The results of the cuts from this specialty blade, which runs about $60, will be dramatically better quality and it will handle different types of materials as well.
Anti-Kickback prawls are the two arms that prevent the material from moving forward when cutting. They are sharp-toothed and the sharper they are the better they work. Sharpening can be done with a smooth-cut file.
Make sure the rip fence on the table saw is adjustable for width and locks parallel to the blade with each setting.
The splitter or riving knife is a crucial anti-kickback device that keeps the saw from binding up in the material being cut, should the saw kerf start too close.
Making sure the table is big enough is essential to making any project run smoothly. A bigger table size gives more room and the material being used more stability. Also make sure throat plate is level with the table.
While some portable saws are sold with a collapsible stand, professional carpenters are more likely to opt for the more stable wooden bench.
Look for sure safety features on the on and off switch. Some portable saws have a switch that is mounted on the front that can be quickly turned off without looking in the event of an emergency.
5 Tips For Perfect Projects:
First never freehand a cut. This allows too much room for error. Taking time and using the proper steps to align material will always make for a better outcome on your projects.
Always use proper blades for the table saw purchased. Make sure the blade is used with zero clearance blade inserts. This will prevent material from falling into the cabinet and becoming a dangerous projectile.
Always check the material for any kind of foreign matter or objects that may be embedded in it. A nail or staple coming into contact with the spinning blade could cause the object to become dislodged and to become a projectile, or depending on the quality of the saw, it could cause a kickback with the material or cause the saw to jump.
When cutting large pieces of a material, a table positioned properly can be used for outfeed. This keeps the material from bowing at when the piece begins to slide past the end of the table saw table. It also keeps the material from rising up on the blade.
When cutting short pieces, use a stick to push with to avoid getting fingers and hands too near the blade, and if the blade needs to be changed, always turn the power switch off and disconnect from the electrical outlet to avoid having the machine turn on if you should bump the power switch.
Before you buy DW745 Portable Table Saw Review, check out this unbiased review of this compact job-site table saw.For similar articles and reviews of my favorite DW745 Table Saw Review see http://dw745tablesaw.com.
Processing your request, Please wait....
