Just Follow Me to Clean the Car Battery
For most car owners, they know the car battery is always required to be checked when the car can’t get started. In general, the life of car battery is 3-5 years, but according to different brands, the lifespan is also not the same. Maybe some one will wonder their car battery is just used for 1 year although he is told that it can be used for 2 years. Why? I think this is very important about how you use the car battery. Of course, the main factor is the maintenance tips. If you never do that, your car battery certainly only owns 1 year lifespan. So before understanding some maintenance tips, you need to know some cleaning process. How should you clean the car battery and keep them clean?
There are a few safety tips to keep in mind when getting ready to clean the battery. First of all, you safety glasses and gloves must be worn to protect your eyes and skin from sulfuric acid that can linger in the corrosion deposits. Also, this material can eat away at your car’s paint, so keep it away from that as well. Because the amount of dirt and corrosion on batteries may differ from one another, battery cleaning will vary, so some of the steps below may or may not need to be performed. Sometimes, to thoroughly remove severe corrosion and dirt, you may even need to remove the battery from the vehicle.
Next scrape off any white or greenish corrosion deposits with the stiff-bristled brush or small metal or plastic scraper. Use the solution of baking soda mixed with water, approximately one heaping tablespoon to each pint of water. Carefully apply it to the outside of the battery and its cable connections with the turkey baster or small funnel. Then, you can use your brush to work the baking soda solution into the heavily corroded areas. If you find that the cable clamps or terminals are badly corroded at the battery, you can disconnect them for easier cleaning. For this, you may need to use pliers, assorted wrenches and a small battery cable puller to disconnect them. You should disconnect the negative first, followed by the positive.
Then, use your battery cable scrapers or brush to remove the corrosion from the terminals, battery posts and hold down clamps and brackets. Flush these parts with your baking soda solution to rid them of any trace of corrosion. After this, wash the outside of the battery, the cable ends and the hold down parts with a liquid cleaner in a spray bottle. After that, use a sponge or rag to get off any remaining dirt or grease. After everything is clean, dry off the battery and all its parts with a dry rag or cloth.
The final step is just reinstalling any part that was removed and tightening everything so it is secure. Reconnect the battery, positive cable first. You’re done! You’re battery is now safe and clean.
Why do you need to keep the car battery clean? I think the main reason is to get the better maintenance. The maintenance tips are to prolong the life of car battery, so it indirectly helps maintain the battery. It is useful for every car owner. Why not do that? Just follow me to clean the car battery. If you want to know more about car battery, please visit http://www.leoch.com
Processing your request, Please wait....
