Home Projector Guide Installation and Getting Started Tips
Projector
As a large screen display technology has already approached the home users, but many users to buy the machine after the installation and use are not aware that if, as in the past
TV
Machines as easily open, causing premature end of the lamp life. Here, I introduce the home user to install and use the projector where it should be noted.
Or move into new homes or improve the taste, look, we have ten years now attached to the traditional TV is not also the "fundamentally changed"? Projector as a large screen display technology has already approached the home users, but many users to buy the machine after the installation and use are not pay attention, as easily as in the past TV as open, resulting in lamp life a premature end. Here, I introduce the home user to install and use the projector where it should be noted.
Installation
Different ways depending on the installation, the projector can be divided into the table type is cast, the ceiling is cast, the table-type rear projection, ceiling rear projection few. Easy to use portable projector at any time is usually the table type is cast, this projection method influenced by ambient light? However, if the decorations on the ceiling is designed to cast way, not only has become more cost-effective advantages, which also displayed the most excellent. Now the desktop is to vote early on the projector is not like the old commercial machines, colors very fashionable choice can decoration, choose the right color with other
Home Appliances
With.
After the projector is installed to form the first step in home theater projector that is connected, the connection is complete most of the projector, and television sets, computers,
DVD
The connection can easily complete the rookie level, but it should be noted that some of the projector cable failure, and computer connections will need graphics cards with video output port, or connect via a single cable with graphics card and connect the projector, optional Be sure to ask clear. As for the sound system, to the formation as long as the projector and sound, amplifier or other multi-media audio-visual equipment is properly connected on it.
Projector installation is relatively simple, but a home theater audio and visual effects is superb realization, it is important to note two aspects of space and the projection environment. As the entire theater space the size of the direct impact of audio-visual effects, place the projector from the wall or when the curtain must have three to five meters away, so as to obtain the best results; As for the hearing, in order to achieve a realistic position, place the best projector room is rectangular, so that the harmony of sound modulation could play a unique role. In the projection, the current most of the projector's brightness are more than 1,200 lumens, but is recommended to install curtains in the room in order to block the outside light, while the room's walls and floors also try not to use reflective material, this way you can adjust to extend the service life of low-intensity light bulb, two to also avoid the effects of other details of the impact of video fidelity. Also, do not let seat close to the watch when the audio equipment or speakers, these will become very poor sound.
Adjustment
General, does not mean the projector is installed you can start immediately enjoy their favorite movies, in order to obtain better results, we must also be some adjustment of its settings. First thing to adjust the resolution, the longest current computer with a resolution of 1024 × 768, if you choose the projector supports 1024 × 768 resolution, the basic you do not need to adjust, but if you use the projector with the highest resolution for the 800 × 600, but the computer set to 1024 × 768 resolution or higher, in this case, the projector will automatically display images using compression, although we can normally see the image, but the display quality is greatly reduced. Therefore, according to the resolution supported by the projector to set the video source resolution, so that mutual agreement to get the best results.
Then the image is projected onto the wall or the curtain on the side of mobile projectors to make the image projected onto the correct position, and adjust the projector lens focus knob on the line, while the projected image of the image to fill the screen as possible.
I am an expert from China Manufacturers, usually analyzes all kind of industries situation, such as tin bread box , wholesale tin boxes.
Processing your request, Please wait....
