Air conditioning installation knowledge required to attach great importance to a
< BR> recently purchased
Air conditioning
Peak, natural, air-conditioning has become a part of many users concerned. Many users will ask, when the air conditioning installation and selection is not also need to pay attention to many issues as you? In fact, it has been for the air conditioning have a "one-third of the quality, seven installation," the statement shows the correctness of the air conditioning installation air conditioning how important. Today, the editors give us some installation process must be noted that five hidden dangers, have recently bought a friend may wish to look at air conditioning.
<BR> Hidden one: leakage
<BR> In air conditioning and refrigeration process, opportunities arise within the drip, and this is not a normal air conditioning use, but because of irregularities caused by air conditioning installation, such as the installation within a wall than through hole (pipe through the outside machine place) is low, installation is not within the formation.
<BR> Test methods: air-conditioning installed in the future, immediately test machine (cooling), if there is no running water droplets leave out some time on the basic leakage problem does not occur. Of course, you can also require the installation of officers for leakage testing, to within the machine into the water, the water then the water through the machine plate, falling into the water pipe outside the natural outflow of normal.
<BR> Hidden 2: Leakage F
<BR> If the joint is not tightened conditioning, cracking, etc., will appear the phenomenon of leakage of fluoride. If the air leakage fluoride, the user would always add, but the normal use of air conditioning a few years generally do not add refrigerant.
<BR> Test methods: test machine preceded check for refrigerant leaks. Inside and outside the machine for air leak then the main channel of the four interfaces, as well as cut-off valve port and other places. Soapy water (you can use detergent) leak is one of the methods commonly used on site, on the split-type air conditioner opening valve 10 to 15 seconds (Guiji 20 ~ 30 seconds) after closing the valve, the various parts of the system quickly filled with more than 0.8Mpa air pressure gaseous refrigerant. Apply soapy water in the leak of suspicious points, if any bubbles form, then tainted, and observed three minutes no air bubbles appear, can be considered qualified.
<BR> Hidden 3: Leakage
<BR> Formal installation of officers will be at the user before air-conditioning
Power supply
Check, if you do not meet the requirements, it will recommend that users change. Power lines do not meet the specifications and installation of air conditioning, fire prone to leakage phenomenon, threatening the personal safety of users.
<BR> Test method: see the installer have the power to bring the relevant testing tools, and power supply for testing.
<BR> Hidden four: Installation location
<BR> Air conditioning installation location has a lot of stress, not the user where to install equipment like where otherwise it would lead to
Service
Trouble, and refrigeration and other consequences of ineffective
General requirements for indoor <BR> body off the ground from 1.7 to 2.2 meters, within the machine can not be within 60 cm outlet obstructions.
<BR> The same time, the outdoor unit is also required, the outdoor unit should try to avoid the heavy smoke, sand and more, direct sunlight, heat or poor high-temperature heat sources, but also easy to avoid leakage of flammable gas, a strong corrosive gases with strong electric or magnetic field manual hidden dangers such as direct effect, but also to avoid the above window; mounting bracket should be easy to install and maintenance of safe operating space.
<BR> Hidden 5: Noise
<BR> Air conditioning will be issued by some noise, but if the noise is too large, there may be caused by improper installation.
<BR> Within the machine when installing wall without nailing, fixed within the machine did not die, it is easy to cause excessive noise phenomenon. This case, the installer through the test machine, it is easy to find and correct the problem.
We are high quality suppliers, our products such as Slurry Pump EMM manufacturer , china Slurry Pump EGM for oversee buyer. To know more, please visits slurry pump suppliers.
Processing your request, Please wait....
It’s always a great idea to keep a keen eye on your air-conditioning unit. I know I neglected my own last winter and it broke over the following summer, which isn’t a good thing when you live in 100+ degree areas.