Manual screen printing banners technical analysis
Said first site More spacious venues the better course, and asked not too high, do not direct the wind blowing, not too cold in winter, when freezing temperatures to minus version, although the frozen version of the problem difficult to resolve, but will increase after all trouble.
Best to have water, better water supply and drainage, not, we should exercise more than a?? First mention of water, dirty water and then withdrawing.
Some may think, and how much Caixing it? If I were to print 30 m 40 m how long the site is not big enough to do?
Easy to handle, people are living, banner is live, and later re-Xiangjie this solution to the problem.
Down to talk about another thing children, in which printed it? Gao Ge best table, of course, to spread something India can only be tired some, you want to, ah, on the ground and India, what position do? Buried vertical Ding, people saw the banner that is in India, do not know what may be thought that in practice it successfully.
Stamp pad production is relatively simple, cost no more than support their own get looked at, the top beams do too little, not more than half a meter 1, a solid number as far as possible, a minimum requirement is a sneeze do Zhensan. Height about 75 cm, MDF panels can be used, such a table area 1.22X2.44, printed banners can also be printed 2 # The following flags, banners when India could not do it with another, if the space is sufficiently large , more than a few, can be used alone, can grow up docking station, more convenient when printing.
Panel above Xianpu layer blankets, acrylic blankets can be cheap, paper blankets are OK, after leveling the blanket taut around the nail in the wood side, then the above, two good absorbent cloth, Note that two were fixed, the first layer will not need replacement, the surface after using some days wish to change.
Than the direct use of the plastic sheet seems like something many of the problems, but a lot less trouble behind the?? Do not get wet every time after India finished with the mop dry cloth wipe cloth.
Additional flexibility to better this table will help with the screen fabric tightly.
Blank screen Printed banners generally use wood Network box The condition also can be used to facilitate aluminum screen frame, aluminum frame to use sticky glue fixed wire network, the other on the specific operation
Printing banner printing to use more words, so light and flexible, and India finished cleaning is also more convenient, so the net box without too much, but to do several dimensions to the use of different width banners.
Length: 50X70cm (box size, the following were) with the use of paper off for 70,90 cm cloth; 36X50cm, with four open for paper, cloth and apply to 60cm and smaller print the words of two lines; 100X70cm, with the degree of whole paper is used, apply to 120,150 cm width fabric and 3 #, 4 # banner; 30X120cm, used to print fine print, for example, need to print the following line of address and a telephone.
Several other renewable production, for example, 60X80cm, large banners for 70,90 cm words, 120X180cm, for producing the # 2 flag.
General principle is that the wood chosen aniseed small box big box small materials, for example 50X70cm's, 3X5 or 4X4's to be specific to master that.
Generally use nylon mesh screen. Nylon nets are cheap, high strength, wear resistance, water resistance, flexibility are better, less is relatively high tensile, relaxation after a period of use.
Mesh printed materials were not selected according to generally be transparent about 120 mesh pulp, cover about 80 mesh printing paste, the other, wire mesh of the net thickness is different when printed cover printing pastes too thin wire mesh will cause a shortage of printed colors to choose to be treated as such.
Stretching screen when the first will be soaked for a while, a certain tension in the box under the fixed network to stretch a good screen with a certain tension is too loose when the easy to run color printing, but not too tight because the nylon net difference between dry and wet state, a greater tension, too tight to use a few times will result in net frame deformation. Mesh fixed to take nails, glue, etc., generally take more spikes. Methods in other forums have been posted in description, in general, with the stretch Inkjet Signs similar to the should be noted that wire mesh box with longitude and latitude as possible straight face the entire network of Zhang as even as possible, otherwise the future deformation.
To use after the screen clean, otherwise the residual slurry very difficult to remove after drying, resulting in waste Edition
Also scraper can use polyurethane rubber scraper, which is more durable, the direct purchase of finished products on the line, screen printing materials dealers have, the length can be according to their needs, it is best to buy a long direct the back, according to need cutting, is very simple, with iron saws sawing is.
Screen, scraper cleaned promptly after use printed materials, place, avoid direct sunlight and avoid sharp objects device. Of course, even away from the stove, heating and so on.
More exciting, please see>>
I am an expert from China Quality Dress, usually analyzes all kind of industries situation, such as sectional sofa covers , modular sectional sofas.
Processing your request, Please wait....
