Chemiluminescence – Stone texture – china Fine-brick texture
Liquid-phase reactions
Luminol in an alkaline solution with hydrogen peroxide in the presence of iron or copper, or an auxiliary oxidant, produces chemiluminescence. The luminol reaction is
luminol + H2O2 3-APA[ 3-APA + light
The quantum efficiency, QC is 1%. For the laboratory experiment see references ,.
Cyalume, as used in a lightstick, emits light by chemiluminescence of a fluorescent dye (also called fluorescor) activated by cyalume reacting with hydrogen peroxide in the presence of a catalyst,such as sodium salicylate. It is the most efficient chemiluminescent reaction known. up to 15% quantum efficiency.
cyalume + H2O2 + dye phenol + 2CO2 + dye[
When the activated fluorescent dye decays to a lower energy level, light is given off. The color depends upon the dye..
Color
Sensitiser
Blue
9,10-Diphenylanthracene
Green
9,10-Bis(phenylethynyl)anthracene
Yellow-green
Tetracene
Yellow
1-Chloro-9,10-bis(phenylethynyl)anthracene
Orange
5,12-Bis(phenylethynyl)naphthacene, Rubrene, Rhodamine 6G
Red
Rhodamine B
Oxalyl chloride (C2O2Cl2) produces light when oxidized – but only in the presence of a sensitiser, similar to the above examples. If oxalyl chloride is treated with H2O2 in non-aqueous media (e.g. CH2Cl2) in the presence of a sensitiser, emission of light is obtained. The colour, intensity and duration of light emission depend on the sensitiser used. Rodamin 6 G gives bright orange light with moderate duration of emission.
Ru(bipy)32+ is a ruthenium(II) complex which undergoes oxidation to ruthenium(III) if certain oxidizing agents are introduced. If ruthenium(III) complex is then reduced in alkaline medium, emission of light occurs. First, there is a reaction:
2Ru(bipy)32+ + PbO2 + 4H+ 2Ru(bipy)33+ + Pb2+ + 2H2O
Here, Ru(III) is obtained. Further reaction includes use of solution of sodium tetrahydroborate(III), NaBH4 in alkaline medium. When the solution is added, Ru(III) is reduced to Ru(II) and orange light is emitted.
TMAE (tetrakis(dimethylamino)ethylene) emits clear blue-green light upon oxidation by air.
Pyrogallol (1,2,3-trihydroxibenzene) is also capable of light emission. If an aqueous solution of pyrogallol, NaOH and K2CO3 is mixed with formaldehyde, short-lived red emission occurs.
Singlet oxygen (O2) can also emit light. If solutions of 30% hydrogen peroxide and 5% alkaline sodium hypochlorite (NaClO) are mixed, red light is emitted. It is barely visible, though – for this reason a sensitiser is often included to boost light emission in terms of brightness and intensity. Again, both colour and intensity of light depend on the sensitiser used.
Lucigenin oxidation is also very well known among chemiluminescence reactions. If an aqueous lucigenin solution is mixed with highly alkaline aqueous solution containing ethanol or acetone and hydrogen peroxide, very bright green emission is produced that decays to greenish blue and finally blue emission. The duration of the emission can be up to a couple of minutes under the right circumstances. .
Solutions containing ions of manganese (VII, IV, III) show chemiluminescence (690 nm) when reduced by sodium borohydride at low pH to Mn(II)
Other liquid phase chemilumiscence reagents:
peroxyoxalates
Aryl oxalates
Acridiniumesters
dioxetanes
Gas-phase reactions
A green and blue glowstick.
One of the oldest known chemoluminescent reactions is that of elemental white phosphorus oxidizing in moist air, producing a green glow. This is a gas-phase reaction of phosphorus vapor, above the solid, with oxygen producing the excited states (PO)2 and HPO.
Another gas phase reaction is the basis of nitric oxide detection in commercial analytic instruments applied to environmental air quality testing. Ozone is combined with nitric oxide to form nitrogen dioxide in an activated state.
NO+O3 NO2[+ O2
The activated NO2[ luminesces broadband visible to infrared light as it reverts to a lower energy state. A photomultiplier and associated electronics counts the photons which are proportional to the amount of NO present. To determine the amount of nitrogen dioxide, NO2, in a sample (containing no NO) it must first be converted to nitric oxide, NO, by passing the sample through a converter before the above ozone activation reaction is applied. The ozone reaction produces a photon count proportional to NO which is proportional to NO2 before it was converted to NO. In the case of a mixed sample containing both NO and NO2, the above reaction yields the amount of NO and NO2 combined in the air sample, assuming that the sample is passed through the converter. If the mixed sample is not passed through the converter, the ozone reaction produces activated NO2[ only in proportion to the NO in the sample. The NO2 in the sample is not activated by the ozone reaction. Though unactivated NO2 is present with the activated NO2[, photons are only emitted by the activated species which is proportional to original NO. Final step, subtract NO from (NO + NO2) to yield NO2
Bioluminescence
Main article: Bioluminescence
Chemiluminescence takes place in numerous living organisms, the American firefly being a widely studied case of bioluminescence.
The firefly reaction has the highest known quantum efficiency, QC of 88%, for chemiluminescence reactions. ATP (adenosine tri-phosphate), the ubiquitous biological energy source, reacts with luciferin with the aid of the enzyme luciferase to yield an intermediate complex. This complex combines with oxygen to produce a highly chemiluminescent compound.
Enhanced chemiluminescence
Enhanced chemiluminescence is a common technique for a variety of detection assays in biology. A horseradish peroxidase enzyme (HRP) is tethered to the molecule of interest (usually through labeling an immunoglobulin that specifically recognizes the molecule). This enzyme complex, then catalyzes the conversion of the enhanced chemiluminescent substrate into a sensitized reagent in the vicinity of the molecule of interest, which on further oxidation by hydrogen peroxide, produces a triplet (excited) carbonyl which emits light when it decays to the singlet carbonyl. Enhanced chemiluminescence allows detection of minute quantities of a biomolecule. Proteins can be detected down to femtomole quantities, well below the detection limit for most assay systems.
Applications
gas analysis: for determining small amounts of impurities or poisons in air. Other compounds can also be determined by this method (ozone, N-oxides, S-compounds). A typical example is NO determination with detection limits down to 1 ppb
analysis of inorganic species in liquid phase
analysis of organic species: useful with enzymes, where the substrate isn’t directly involved in chemiluminescence reaction, but the product is
detection and assay of biomolecules in systems such as ELISA and Western blots
DNA sequencing using pyrosequencing
Lighting objects. Chemiluminescence kites, emergency lighting, glow sticks (party decorations).
Combustion analysis: certain radical species (such as CH* and OH*) give off radiation at specific wavelengths. The heat release rate is calculated by measuring the amount of light radiated from a flame at those wavelengths.
children’s toys
See also
Electrochemiluminescence
Lyoluminescence
References
^ a b “Luminol chemistry laboratory demonstration”. http://www.3rd1000.com/labs/lumine.htm. Retrieved 2006-03-29.
^ a b “Investigating lu.inol” (PDF). Salters Advanced Chemistry. http://www.york.ac.uk/org/seg/salters/chemistry/ResourceSheets/luminol.PDF. Retrieved 2006-03-29.
^ a b Rauhut, Michael M. (1985), Chemiluminescence. In Grayson, Martin (Ed) (1985). Kirk-Othmer Concise Encyclopedia of Chemical Technology (3rd ed), pp 247 John Wiley and Sons. ISBN 0-471-51700-3
^ Helmenstine, Anne Marie (Aug 10, 2004). Light stick chemistry, retrieved Sept. 22, 2004.
^ For more information about how to perform experiments mentioned, see the reference Bassam Z. Shakhashiri: Chemical Demonstrations, Volume 1, University of Wisconsin 1983.
^ New light from an old reagent: Chemiluminescence from the reaction of potassium permanganate with sodium borohydride. Neil W. Barnett, Benjamin J. Hindson , Phil Jones, Claire E. Lenehan and Richard A. Russell. Aust. J. Ed. Chem., 2005, 65,
^ Air Zoom | Glowing with Pride
^ Enhanced CL review
v d e
Lamps and lighting
Incandescent
Regular Halogen Parabolic aluminized reflector (PAR) Nernst
Fluorescent
Fluorescent (Compact) Fluorescent induction
High-intensity
discharge (HID)
Mercury-vapor Hydrargyrum medium-arc iodide (HMI) Hydrargyrum quartz iodide (HQI) Metal halide (Ceramic) Sodium vapor
Gas discharge
Deuterium arc Neon Sulfur Xenon arc / Xenon flash Black light Tanning lamp Germicidal Growth light
Electric arc
Carbon arc Yablochkov candle
Combustion
Acetylene/Carbide Argand Candle Diya Gas Kerosene Lantern Limelight Oil Safety Rushlight Tilley Torch
Other
Light-emitting diode (LED) LED lamp Solid-state (SSL) Plasma Electroluminescent wire Chemiluminescence Radioluminescence Glow stick Spotlight
Categories: Luminescence | Spectroscopy
I am an expert from decorative-wall-panel.com, while we provides the quality product, such as Stone texture , china Fine-brick texture, china decorative wall panel,and more.
Processing your request, Please wait....
