Light Bars Truck Owners Usually Install For Safety
Light bars truck owners take a preference for are the ones that are highly functional, light up even the most dimly lit roads and also work efficiently under any weather conditions. The light bars that are available in the market now are designed to meet all these requirements and more and make commuting relatively easy for truck owners.
Without adding mounting feet, sturdy, full sized Light bars truck owners install on their vehicles measure about 2.5 inches in height with a width of about 12 inches. The standard lengths vary depending upon the need and the vehicle too. The light bars could be on the shorter side measuring just 36 inches in length. They could be on the longer side, exceeding 72 inches. However, one of the problems faced due to bigger light bars is that they tend to be heavier and create air drag when the trucks are speeding on highways. This is why the design of the light bars is very important and has to incorporate specific stylization just to prevent the air drag. A balance has to be achieved between the weight of the light bar and its dimensions as well to lower the pressure on thinner roofs. Longer width is therefore preferred to excess height.
The Light bars truck owners usually prefer come with corner modules with super bright LEDs, which help in providing a wider light coverage. Individual light heads can be removed from a light bar when they stop functioning. They can be easily replaced so that the light bar is fully functional. Some truck owners also prefer wrecker light bars which come in a standard length of 62 inches and have rear work lights, brake lights and tail turn lights, all of which help in maintaining road safety. Some light bars are multi segmented with split color sections in the center.
Colorful patterns are usually built into Light bars truck owners would love to use. These light bars can be installed near the front grille to provide additional lighting as well. On dark nights, these light bars ensure that the trucks and heavy vehicles are easily spotted. Moreover, these flashing lights can operate for thousands of hours, especially if they are made of LEDs. They can operate continuously without getting overheated. Vacuum formed housings for these LED bars have sufficient provision for heat to escape to keep them cool.
For Light bars truck owners usually prefer those with anodized aluminum housings that are corrosion resistant and at the same time structurally strong. Whether bolt fixing is used, magnetic mounting is used or flush mounting is the preferred mechanism, it is important that the weight and size of the light bar is kept in mind. 15 – 20 foot long cables and interconnect harness are usually provided along with mounting hardware kits so that there isn’t much trouble with their installation.
The Light bars truck owners purchase, must also provide special optical advantage. This is possible through the use of polycarbonate, replaceable lenses that spread the beam. Chrome deflectors are also used to enhance the lighting effect and make it brighter. LED light output is extremely impressive compared to their halogen counterpart and this output can be achieved with simple 1 – 10W LEDs, if the right sizes of diagonal or diamond mirrors along with lenses are used. Filters can be used for attractive colored beams.
Extreme Tactical Dynamics is a one-stop shop for
Light bars truck and many other items like Flashlights, Deck Lights, police lights, etc. Please visit the site for more details of various items available – http://www.extremetacticaldynamics.com/
Processing your request, Please wait....
