Air Suspension Problems and Resolution
The air suspension is a technological marvel. It produces a special traction feeling on all terrains. When operating properly, it offers the most luxurious and comfy 4×4. But manyowners know from expertise that once that sophisticated suspension fails. they have a dilemma that makes them call a tow truck and abandon their beloved vehicle at the nearest garage. Some even choose to reject the air suspension and use the classic spring suspension. At that moment they are abandoning a magnificent suspension and leave their beloved auto with no an argument for future sale and will have to communicate it to the buyer. With FASKIT it is not necessary to reject air suspension and you will have a diagnostic program for malfunctions and your confidence will be improved given that you won?t have to call the tow truck for that reason. Faskit is put in the air line between the air suspension springs and its valve box. Thus it makes it possible for operation freeing each and every pneumatic spring individually and inflate the springs by means of the compressed air of the automobile coming from the compressor or in a gas station. FASKIT does not reduce the reliability of the air suspension of the car. On the contrary. You have a trustworthy program which provides you security and assists you in the diagnostic of failuresAnd most importantly: it prevents you from becoming stranded on the highway or the mountain ?The installation of Faskit makes use of fast adjust connectors which form a tight seal about the diameter of the air tubes. To make certain this seal, it is important to insert the tubes properly by pressing sufficiently. The cutting tool (supplied) enables the tubes to be cut to the necessary length. The connectors that we supply with Faskit are developed so that no tools are needed for its installation.
The connections are made by pushing the air lines into the fast adjust connectors until the air line is joined automatically. The air lines must be properly immobilized as far as doable to stay away from any tension or inadequate movement. Be careful that they are situated far from hot or moving parts. It is crucial to keep away from extreme angles in the connection of the air lines. Tension in the connection could deform the air line and prevent a right seal. In brief:The Faskit connection is produced only as soon as and it is not required to remove it ever again. If a failure takes place you only have to operate on the closure keys and inflate the suspensions manually and function in this way indefinitely or until you decide to repair it. No special tool is necessary and it integrates perfectly in the engine compartment. The factory suspension hardware is left intact and operational. Faskit enables independent inflation of each spring based on the load and its distribution. It is a remedy to recover the height of the auto as soon as a failure takes places in the original method. When the failure is repaired the original program is restored simply, just turning the closure keys to the open position. It supplies compressed air, as well as a pressure gauge to control the operating pressure of the technique.
Georgette Adanas has been writing articles or reviews on air ride suspension kits since 2000.
Processing your request, Please wait....
