How you can Set up E3 FLASHER On Slim PS3
First, we need put together subsequent item:
One PS3 controller which may downgrade to 3.55
E3 FLASHER Restricted edition with 8 accessory. (it will consist of universal screwer)
SLIM disassemble tutorial
1: Eliminate the four hexagon nut below the cover of PS3 bottom.
2: consider out nut around the High definition, and obtain out hardisk .
3: Eliminate the seal, and consider off all nuts
4: open up Top cover
5: Take off the nuts beside energy, and unplug power cable apart from power, consider out powe Module.
6: Remove the black nut around the correct of 220V energy cable and also the nuts around the leading of BD driver, please note the large and little size, particularly the nut on driver is large, don’t mixed when re-install.
7: Unplug all BD driver information cable
make sure you note there has a data cable below the driver , becareful unplug it.
8: Unplug the front buttom board prior to take out BD driver. Please note only disconnect with console, no need take out, simply because there has cable link to mainboard.After which cable take out BD DRIVER.
9: Unplug antenna, and remove from mainboard track, no need disconnect metal of antenna, and unplug the front board together with cable.
ten: You’ll need consider off 4 white nuts prior to consider out mainboard.(white nut is fixed for High definition)And then can consider out mainboard
eleven: Remove all nuts from metal shade around the back of mainboard,Consider out Metal shade,SLIM console solder tutorial: following testing stage showes the solder range.
E3 FLASHER provide gentle board unique for SLIM console, you are able to set up quicker using the screening stage, no require any diagramme, and 100% secure with out any issue.
Solder sequence Solder SBCE stage initial, and solder SBE to fix soft board. If you’re able to watch all screening stage in front it means right place. After which solder VCC BVCC GND etc, please note those stage need heat small much more time because of mainboard technology. And then solder other stage. Suggest solder posture :By the way, to fix gentle board, you can use double-side tape as image showes, and stick on mainboard.Finished
SLIM console remout tutorial Now we want connect mainboard which set up soft board well to console again.
1: We want remout metal shade to mainboard, make sure you note soft board require location into Hd warehouse.
After install steel shade properly
Additionally, for properly solder , you can test with E3 FLASHER mainboard, examine installation screening tutorial
2: Location mainboard into situation, make sure you be aware soft board require throughout Hd warehouse of situation initial, to prevent harm gentle board, after which place white and black nuts correctly, and set up anternna correctly.
Place mainboard into situation
2: Set up buttom board and BD generate.
The buttom board need connect cable initial, and do not set up on case simply because you’ll need install drive initial
Install buttom board and BD drive,you’ll need link cable first in the bottom of drive , press connector carefully.And connect external cable,Then install BD drive and another nut.Finally install buttom board on mainboard,set up buttom board on mainboard.
3: Install energy moduel, make sure you set up the two nut well and then set up power cable
4: Following near the very best cover, you’ll need set up all nuts which in the bottom (not include nut on Hd warehouse)
set up all nuts which at the bottom (not include nut on Hd warehouse)
5: Install E3 flasher mainboard ,the mainboard positioned within the special steel shade
Install E3 flasher mainboard
Put it into High definition warehouse , much like install High definition
And then ducked the connector on soft board into mainboard socket, you can press from left to correct with finger. You will hear clear sound from connector in the event you connect properly.
After which ducked the connector on gentle board into mainboard socket
Set up properly
Push mainboard into High definition warehouse, becareful or else it’ll harm connector of SATA , or not link corretly.Then, set up E3 Flasher cover board into mainboard, do not error the location.set up E3 FLASHER cover board into mainboard.Finally install nut of High definition warehouse
If all is correct, you will see LED lights after connect ps3 power (no need begin PS3)
Lastly, connect ESATA station, place original PS3 High definition into esata station and setting buttom on COVER BOARD to PS3 MODE, OFW. the High definition switching sequence is : turn off PS3-turn off esata station power-unplug PS3 energy cable-place High definition to esata station-plug ESATA cable to ps3- plug PS3 power cable-power on esata station?turn on ps3. If can flip on ps3 properly, congratulate you’re successful !
Much more info you can go to the site fyygame.com, if you would like to buy inexpensive E3 Flasher or PS3 controller,I thank fyygame will be the best select to save your cash.
Processing your request, Please wait....
