Bathe in Glory
It’s all within the planning
When it comes to bathroom design, small can still be beautiful – particularly if you plan the project in advance. Think about your required layout to be able to observe how it will work in practice and when you speak to your builder you’ll have a good idea of what you want. To help you begin planning, the Builders In Kent has published The fundamental Help guide to Do it yourself, a free brochure packed with sound advice on planning home improvement projects, and choosing and dealing together with your builder.
Make use of the skills
Adding a bathroom by converting a current room or building extra time is really a job for a professional builder or plumber. You won’t cut costs by doing it yourself should you end up getting water gushing through the ceiling below!
Regulations
Unless you are building extra time, you won’t need planning permission for a new bathroom, but if you’re converting a room from scratch you may need to satisfy Building Regulations so get in contact with your building control department at your local council for advice.
Are you able to go ahead and take pressure?
If you are adding another shower or bath, you may need an additional storage tank or pressure pump to prevent water pressure fluctuating. To provide sufficient pressure to run a shower you’ll either need to install a pump or enhance the height of the cold water storage tank.
The advantage of instant warm water from the combination boiler ought to be weighed from the disadvantage of possible lower warm water pressure than that achieved having a warm water tank system.
Don’t explore space
If you’re upgrading an existing bathroom on a tight budget, you should consider putting new sanitary ware in the same location as before, as re-plumbing will prove to add towards the cost. A brand new layout may be a better use of space, so start by measuring the room and planning on paper the best position of the bath, basin and loo.
If you have another loo and bathroom you might want combine the 2 rooms. You may be surprised at the amount of dead space which is wasted inside a separate toilet This could offer you with necessary light.
Waste not want not – Get green!
The main practical consideration inside a bathroom is getting rid of waste water, so it’s normally cheaper to place the toilet at the back of the house where it is simpler to run a soil pipe.
Are you aware that over 30% of water delivered to the home is used for flushing the loo? The latest cisterns use 2 litres less water per flush than ones fitted before 1993.
Most showers are more water and fuel-efficient in contrast to baths – the exception being powershowers. These use so much water that you should check with your plumber the drainage can deal with it as being you don’t want an overflowing shower tray.
Electric showers can be energy-efficient because they come with an integral pump and instantaneous heat, but remember to ensure that they’re fitted with a qualified electrician.
Heat up
Check out the heating arrangements in your new bathroom – many modern radiators will also be created for drying towels and have the benefit of working from the existing hot water system.
Efficient heating might help disperse condensation but bear in mind that to satisfy building regulations you’ll need an extraction system.
Make sure to just use a Corgi registered installer if your heating is gas operated.
Only use a vetted builder
Finding a professional company to transform your bathroom needn’t be a problem. With a few 13,000 vetted builders through the UK, the Builders In Kent’s website, www.findabuilder.co.uk is a great starting point, or ask friends and relatives who have had similar work done to recommend someone – they’re only prone to achieve this when they were built with a good experience!
There is lots to become learnt from experience thats why its vital that you share your knoweldge. Thanks to for that Kent Builders infomation!
Processing your request, Please wait....
