PlayStation 3 Will not Read Disc? Tips on how to Fix PS3 Blu Ray Drives

If your PlayStation 3 won’t read discs you then have come towards the suitable place. In this article you’re going to discover the way to repair PS3 Blu-ray Disc drives with step-by-step instructions.

So as to fix your PS3’s Blu Ray drive you will need a set of appropriately sized, cross-headed screwdrivers; certainly one of individuals sets which has several sizes will contain the right one particular, and also you will almost certainly have one of these lying around someplace.

Also, you’ll need a replacement laser lens for that Blu Ray drive, so you will need either a replacement drive from which you can “salvage” the lens, or you can get on line aspect quantity #kem-400aaa.

The actual procedure for repairing the Blu Ray drive on your PS3 console just isn’t all that difficult. You need to take away the drive from your console soon after disconnecting the electrical power cable and information ribbon, get rid of the protective metal casing on the outside on the drive, then the black colored plate which protects the delicate laser lens and mechanism itself video game accessories.

Up coming, unscrew the screws which hold the laser lens in location, take away the previous lens, then install the new one particular. Soon after this, you just need to place almost everything back together, seat the Blu Ray drive back in place, reconnect the data ribbon and the electrical power cable, then your PS3 need to be working yet again like brand new.

The way to Burn Film To Blu-Ray Disc

That got me to pondering… With a Blu-Ray 50 GB, I could Literally place the entire unique (high bitrate versions of) the “holy trilogy” on 1 disc! That was the many determination that I essential. I did some searching all around, and identified that the Sony internal (100) model supports both the 25 and 50 GB discs in both -R and -RE kinds. Other drives (which actually are Additional Costly) only supported the 25 GB single layer assortment.

Following going residence, I the drive into my principal Computer, and my computer (for some strange cause) wouldn’t boot into windows OR go in to the BIOS settings. Apparently, the drive confused my “older” (and I use this phrase loosely) motherboard. Determined to generate this do the job, I pulled the drive and installed it into my son’s “newer” computer system. It was recognized and worked fine.

I loaded blu-ray creator I searched on net(you can download right here:), and did a check burn having a 25 GB BD-RE disc. Sure adequate, my 1st 5-7 discs would are “coasters”, as my Playstation 3 refused to play them and came up with an error code. Immediately after executing a search on the ‘net employing this error code, I was pointed to a thread that explained that this issue had been fixed via a recent patch on Cyberlink’s web page. By putting in the “Sony patch” for the Director software that came with all the drive, I was Lastly in a position to produce Working Blu-Ray discs for your PS3.

Processing your request, Please wait....