Keeping swimming pool clean with chemicals
It is a hard fact that chlorine happens to be the most popular chemical when it comes to cleaning and disinfecting not only houses but also swimming pools. Chlorine is ideal for killing bacteria and controlling algae in pools which make them safe for swimming. There are some other swimming pool chemicals in CT that are used along with chlorine to keep the bottom and the walls of the pool neat and clean. The chemicals known as antimicrobial pesticides also contain chlorine as well.
The water in the swimming pool is not like the one that comes from the faucet and therefore is not for drinking purpose. The major difference is that the water from the faucet is well treated and has the desired level of chlorine present which is not only safe but is also good for killing germs. Contrary to this, the pool water is contaminated from air and from people as well. This is the reason why swimming pool chemicals in CT that are added to the pool are quite strong as compared to the ones that are found in drinking water. These chemicals tend to lose their effectiveness overtime when they evaporate or get exposure of the sun.
Since these chemicals are quite strong, it is essential to take precautionary steps. By reading the labels carefully will enable you to use such products in a safe manner. There have been many cases when people got breathing problems and skin irritation when the chemicals were in contact with the skin before they were added to the pool water. They must be kept away from children because if they are swallowed, they can burn the throat and under severe cases can become fatal as well. The damage to the body caused by the chemical is dependent upon the exposure to the chemicals. At any time, you get chemical on your hand or on your face, it is important to wash off as quickly as possible.
There have been many tests carried out to check the impact of chemicals on the swimming pool water. The results of these tests conclude that these chemical make the pool water ideal for swimming because they ensure safety and visual clarity. The pH level and the chlorine level tend to change overtime as weather condition changes and these must be adjusted on regular basis. The pH value must be adjusted before one adds chlorine to the water. Slight change in the pH value can reveal different results. For instance, chlorine is twenty percent effective when pH value is 8.0 whereas the effectiveness drops to eight percent when the pH value is 8.5. As pH value drops and becomes lower than 7.0, chlorine becomes overactive.
Although there is a well-balanced pool water system but there are times when the swimming pools become cloudy and do not look clean. This is because of the small dirt particles in water that are not trapped in the filter system. By using flocculants, these particles can be easily cleared.
Using the right type and amount of chemicals is really essential when it comes to swimming pool service in CT. Besides this, you can also consider getting accessories such as winter safety covers for swimming pools in CT.
Processing your request, Please wait....
