Which wood Jointing Technique is Better For your Job.
There are almost as a lot situations for wood jointing as there are another wood joint strategies that have come up over the years. One of the most well-known jointing systems that have been around for a long time is the dovetail joint. The dovetail joint in the past were marked and than hand chiseled and cut by a wood worker. This is why today they have the celebrity as one of the finest systems around for jointing pieces of wood together. Nowadays with modern tools and industry, it is really fast and easy to make high quality joints in a type of wood thicknesses and job situations. One jig I have used with great satisfaction it the porter cable dovetail jig 4210. This jig is quite easy to set-up and is an enjoyment to use.
There is also the daily spline jointing system. In this system you sline cut, or rip dado’s along the length of the two wood pieces to be joined and then connect them with a “spline” that fits in the middle of the two pieces. The benefits of the spline is that its somewhat snappy to create and it’s a lot more compassionate than a dovetail joint. In the past, the German craftsman I was taught from in Los Angeles, didn’t have dovetail jigs like the porter cable dovetail jig 4210 earlier mentioned.
Another popular jointing technique is the dowel pin system. This method has increased in recognition these days with the arrival of several useful jigs for facilitating this type of wood jointing. The jig holds to the work piece and then a hole is drilled into both pieces, lastly, a dowelling pin and glued are used to bond the two pieces. This is a very nice habit and is fairly fast and easy to use for jointing. I however, do not prefer to use this method. I find that it is extremely ease for the pieces to be off a bit, which means running it thru a large sander.
Of all the techniques I have used, I really want to do rabbeted wood pieces and dovetails. One of the reasons is that rabbeted pieces are nice to highlight to dissimilar colored woods for a very “high-end” look. The other justification is because friends, family, and clients a like all see the dovetail as a sign of excellence. Sometimes I have to chuckle how even a worker who knows very little about woodworking will still look to see if the joints are dovetailed. It’s the standard sign of value!
The useful part is that since jigs like the porter-cable 4210 12-inch dovetail jig came onto the market, now you can do high-quality joints like this very speedy and with ease. The nice thing about this is that if you take the few minutes it takes to make a dovetail with your jig, you’re forthwith looked at as a “tradesman” rather than just a fabricator. If you take the time to put the extra quality of a dove tail joint you will see that your peers will start looking up to you. It’s really kind of amusing! There really is a status that goes with doing dovetails. The secret is, it’s not difficult, nor is it time engaging anymore! Ssshh! If you get this jig, don’t tell everyone!
If you would like more information about the Porter Cable Dovetail Jig 4210, visit our website for an In-Depth product study. We have information available where you can get direct access to the hottest deals from suppliers that deliver expeditious, and often free shipping! Click here for more info on the Porter-Cable 4210 12-inch Dovetail Jig.
Processing your request, Please wait....
