How to set up Danfoss central heating system?
Heating systems are common today that lets people to have the desired climate in their rooms. Gone are the times of using old traditional radiators to comfort from winter seasons. The modern heating systems have attracted the people by the central heating system that allows room by room temperature control and lighter weight which adds more convenience to handle with. Danfoss central heating systems are popular not only for its efficiency but also add ambience and decoration to the room.
The installation of Danfoss central heating system is much easier when compared to other brands. The first thing to consider is the place where you can equip the boiler systems. It is better if you make it work under the house. Before you start your work, you should disconnect the power from your home. It would be safe that you should not get electric shocks while you connect the cooper pipes. Next you need to set up is the air handler of the central heating system. Danfoss provides manuals that contain instructions to follow for the proper installation of the air handlers. If you still have confusions, you can speak to Danfoss through the contact numbers provided in the manual guide. Improper installation may cause serious issues that destroy the entire heating system.
The next thing to consider is the compressor which maintains the pressure and rate of flow of the refrigerant. You have to find the right place to connect the compressor which makes the outdoor unit of Danfoss central heating. It should be placed 18 inches away from your garden or house foundation. As per the instructions in the guide, you have to drill two holes for connecting the refrigerant tube which absorbs the refrigerants and electrical tube that circulates the air throughout your house.
Now you need to connect both the compressor and the air handler to the breaker of your central heating system. A breaker is the fuse that interrupts the power when the current flow in too much. It is a safety device to prevent short circuits, shocks and other electrical problems. The required appliances should be connected to the breaker box else the system will fail to operate.
The last step is to install the thermostat panel that connects the thermostat to the wall. Now lay the electric wire of the thermostat to the breaker. The thermostat has the ability to sense the room temperature and helps you set different temperatures at different times. Before closing the breaker box, ensure that all the appliances are properly connected to the breaker. Now you can turn on the electric power. In the beginning you will feel a slight smell but you don’t have to worry. After 10 minutes, you will feel warm air from the heating radiators and make checks through all your rooms. If the Danfoss central heating system is not working well, check your connections and make sure that everything is right. If you still have problems, you can contact the support team.
If you to know more about central heating you can visit this site in Dutch the term is (Centrale verwarming).In addition you can read more about heating (Verwarming in Dutch).
Processing your request, Please wait....
