Get your tackle delivered direct to you
Over the years manufactures have developed various technologies which allowed them to introduce materials like fiberglass, graphite and e-glass to the world of sea fishing tackle. They all have experimented quite a bit with these material and most of the time have come up with remarkable products.
Majority of new generation of sea fishing rods and reels, with some minor exceptions, are manufactured from such materials so to make them less susceptible to corrosion caused by saltwater. Although most manufacturers still recommend for sea fishing tackle, reels especially, to be rinsed off in tap water after each use in order to prolong the life of sea fishing tackle.
The key to success in the world of so much competition from so many manufacturers is in ability to produce well balanced equipment. Well balanced sea fishing rods, poles and reels are essential for good casting. For this reason all manufacturers put guidelines on their products advising anglers which lines and lures are best suited to their fishing poles, rods and reels. But if you are new to all this, I have written a series of reports on various spinning rods and reels such as for baitcasting and for light, medium and heavy tackle spinning. This one is mainly about the rods and reels for heavy freshwater and medium saltwater spinning.
Such sea fishing rods and reels are often used for casting lures in most surf conditions or from a fishing vessel. They also work well in medium to large size waterstreams for catching reasonably large size trout.
Medium saltwater spinning reels would usually hold about 350 yards of 6 lb test mono line or about 335 of 8 lb test mono line and the reduction in capacity goes so on. This is just a rough estimate as actual capacity of reels can very significantly from one manufacturer to another. Lines which are smaller in diameter would allow you a lengthier cast (depending on the size of your lure) and larger lines would usually result in a sorter cast. You should adjust the size of your line in accordance with the type of water, fishing tackle, desired length of cast and the weight of your lures. Consider using a larger diameter line (but not more than 12lb test) in waters where there are obstacles such as large amounts of weeds because a lighter line can easily snap if it gets tangled. You can also get advice on fishing tackle from your local specialists.
When selecting a reel, make sure that the one you are planning to get has a reasonably large diameter spool so to avoid line twist. For a medium power sea fishing rod, between 7-9 feet in length, the spool should not be smaller than 4.5 to 5 millimetres. You should also adjust the fishing rod length by taking into account the following factors: the type of reel, fishing line, lure, fishing tackle and water condition.
You should also make sure that the reel has a smooth drag and even a small fish can snap your line a fast moving waters if the drag of your reel is not up to scratch
It is also wise to get a spear spool when buying a new reel. This is because there can be time when you may need to use a different size or colour line.
As regards to choice of lures, these reels would suit anything from a ¼ to 3/8 of an ounce lures. Adjust the size of your lure in accordance of the size of your line, fishing tackle and water conditions so to achieve adequate cast and allow it to sink with ease. If it is something you are still not sure about then ask your local specialist on fishing tackle direct.
At last, if the reel you want to by does not already have a line on it, ask your sea fishing tackle dealer to load the line on for you as they usually have line loading equipment in store. This could save you a lot of time and effort. Also don’t forget to ask about a line lubricant as it will really help you to maintain your line and reel in good working order.
Processing your request, Please wait....
