Deciding on the suitable frame style when installing new windows.
Final week, I told you how to measure for your vinyl replacement windows when replacing aluminum windows. Now that you are prepared to order your new vinyl replacement windows, we want to talk about the various frame style options readily available. In most of the country your selections are restricted to either new construction or replacement frames. New construction frames come with a nailing fin to attach the frame to the studs for the duration of the construction of the new residence. The replacement frame is fundamentally the new construction frame minus the nailing fin.
But in the west, exactly where stucco properties are typical, producers came up with a third type of frame called a retrofit frame. The retrofit frame has a fin about two inches wide, situated flush with the outside face of the window. This is the best selection when replacing old windows, but not all jobs will accomodate a retrofit frame application. So let’s discuss how to decide which frame is going to work for you.
If you have a stucco exterior, retrofit is the way to go. You install the new window from the outside, and the flush fin covers the old aluminum frame that you are going to leave in location. Then you screw the new window in employing deck screws via the side channels as nicely as the best header. We will get into far more detail on the actual installation in a future post. If you have a stucco exterior, but there is a wood trim around the opening of the window exactly where the flush fin would commonly go, you can still use the retrofit style frame. You would need to have to remove the wood surrounding the opening, install the retrofit window, then obtain and install new wood trim. The old trim will no longer fit considering that the retrofit window frame dimensions will be bigger in width and height than the old window frame. One more option is to install the retrofit fin on best of the wood trim. You can do this as lengthy as the depth from the face of the wood trim to the point in the house of the innermost portion of the old aluminum frame is less than three inches deep. The reason is due to the fact a great high quality retrofit window will have a 3 inch frame depth from the back of the flush fin to the innermost element of the frame. That innermost portion wants to be additional into the residence than the innermost portion of the aluminum frame so that the aluminum frame will be hidden right after we apply the inside trim. What if you have brick about the window openings? Or siding? Then what? Well, if you can install the window against the face of the brick or siding and nonetheless have the innermost portion of the vinyl frame be additional into the residence than the old frame, then you can use the retrofit style frame. If not, then you have to use the replacement style frame,then use trim to finish the outside. If you are in a position to get a retrofit frame with a comparatively thin fin, you can also trim down the fins so the window fits between the brick or wood. That would remove the need to trim out the outside. Some manufacturers of retrofit frames will have grooves in the back of the retrofit fins. You basically run an utility knife in the groove till you are able to break off that piece of the fin.
The major point to bear in mind when figuring out whether or not to use a retrofit frame or a common replacement frame is that in order to use the retrofit frame there demands to be much less than three inches from the outside point where the flush fin will rest to the inside point in the room where the old frame ends. If it’s less than three inches, go with the retro, much more than three inches, use the replacement frame and add trim to the outside in lieu of the flush fin.
For more information about this topic visit induction lighting for parking lot lights. More details located at wordpress design company.
Processing your request, Please wait....
