Enhance Your Employability With 220-702 Online Course for a single network
Specifies the WINS servers that are used to resolve WINS queries. You can use the arrow buttons on the right side of the list box to move a server up or down in the list.
Specifies whether an LMHOSTS file can be used for name resolution. If you configure this option, you can use the Import LMHOSTS but- ton to import an LMHOSTS file to the computer.
Specifies that the computer should obtain its NetBIOS-over-TCP/IP mcsa certification and WINS settings from the DHCP server.Allows you to use statically configured IP addresses so that the computer is able to communicate with pre–Windows XP computers (NetBIOS was discontinued with XP).
Allows you to disable NetBIOS over TCP/IP. Use this option only if your network includes only Windows XP clients, Windows Vista clients, or DNS-enabled clients.
Windows Vista allows you to configure more than one network adapter in a single computer, which is referred to as multihoming . Windows Vista also supports logical multihoming, which is when multiple IP addresses are configured for a single network adapter. You would use log- ical multihoming if you had a single physical network that was logically divided into subnets and you wanted your computer to be associated with more than one subnet.
To configure multiple IP addresses for a single network adapter, you would take the fol-lowing steps:Right-click the Local Area Connection icon and click Properties.In the Local Area Connection Properties dialog box, highlight Internet Protocol Version 4 (TCP/IP), and click the Properties button.In the Internet Protocol Version 4 (TCP/IP) Properties dialog box, verify that Use the Fol- lowing IP Address is selected and configured with IP address information.
From the Internet Protocol Version 4 (TCP/IP) Properties dialog box, click the Advanced button to access the Advanced TCP/IP Settings dialog box. On the IP Settings tab (shown in Figure 8.37), under IP Addresses, click the Add button. You will then be able to assign
Alternate Configuration is designed to be used by laptops and other mobile computers mcitp server administrator to man- age IP configurations when the computer is used in multiple locations and one location requires a static IP address and the other location(s) require dynamic IP addressing. For example, a user with a laptop might need a static IP address to connect to their broadband ISP at home, and then use DHCP when connected to the corporate network.
Alternate Configuration works by allowing the user to configure the computer so that it will initially try to connect to a network using DHCP; if the DHCP attempt fails (for example, when the user is at home), the alternate static IP configuration is used. The alternate IP address can be an Automatic Private IP Address (APIPA) or a manually configured IP address.
To configure Alternate Configuration, you would take the following steps:The Internet Protocol Version 4 (TCP/IP) Properties dialog box appears. On the General tab, verify that the Obtain an IP Address Automatically radio button is selected. Click the Alternate Configuration tab, as shown in Figure 8.40.
Processing your request, Please wait....
