High-Class Parts Can Produce Good Hammer Crusher
Hammer Crushers is suitable for crushing and drying soft or nonabrasive materials, eg: gypsum, chalk, clay, slurry, filtered cake, etc. It can break up, dry and calcine industrial byproduct plaster, flue gas desulfurized gypsum. This equipment is of high efficiency and low energy consumption. It has the function of breaking up and crushing the materials while drying them. The rotary totor breaks up the materials, hot blast dries them, and air flow takes the crushed and dryed materials into separation chamber. Afterwards, fine powder is separated in cyclone, while coarse particles go back to the used hammer crusher and crushed again.
Hammer crusher works: the main working part of the hammer crusher rotor is a hammer (also known as hammer). Rotor consists of the spindle, disk, pin and hammer. The motor drives the rotor in the crushing cavity high-speed rotation. Material from the upper feed port into the machine, high-speed movement of the hammer blow, impact, shear, abrasive and grinding.
Hammer crusher product fitted in the framework using high-speed rotation with the shaft, the impact with the materials over the rotary drive hammer to break. In to the hopper in the higher covering materials were fierce impact of high rate rotation in the hammer be broken from the impact from the substance obtained as the power from your rotor to very fast in the direction of the difficult case lining, has again been cracked by device Shell lining material falls time for the rotor touched when, once again under attack, and so the impact of the materials becoming broken repeatedly, to request the pad is graded fine-toothed comb through the discharging board or display to become in the aircraft. The crushing procedure accomplished in a closed chassis. To a service-oriented brand integrity,As the professional manufacturer of complete sets of mining machinery ,like cement plant, Henan Hongxing is always doing the best in products and service.screw classifiers:http://www.hxjqchina.com/product-list_37.html
Counterattack hammer crusher equipment , whether or not the manufacturing capability with the rotor wheel size and quantity, normally, on both sides from the rotary dial within the rotor wear probably the most significant, will be the emphasis of crusher repair. Thickened by both sides of the dial the proper way to help the wear opposition, and also to avoid distortion when welding repair. New developing supplies branch thickness 12mm rotary switch through the original 20mm, the material is changed towards the steel plate 16Mn 65Mn steel. Drastically improved wear resistance.
Spindle as the main parts of the crusher, the traditional way, check and optimize the design, the process complicated. Technical staff through the manufactured products on a variety of materials broken broken tracking service, provide a reliable basis to re-design and modification. Analysis results to evaluate its performance, and on this basis, reasonable structure size, optimized to reduce the quality of the main axis of the hammer crusher, while maintaining its strength and stiffness.
Processing your request, Please wait....
