Experts suggest: Tips on how to protect your car paint – car paint, car paint, p
The world's goods vehicles are the car of steel shell, in order to prevent embroidery and beautiful, the paint is indispensable.
Car paint baking paint generally. Inside the depot, frame, car shell welding is complete (and sometimes manual repair), the next process is painting. In general, the first primer. The light truck shell immersed in syrup-like paint tank, remove the drying primer; and then give it away free workshop process with a electrostatic paint spray paint. And then drying temperature of about 200 degrees. Fine points, but also to a layer of varnish. This paint process're. There are several general finish: Putong Qi; metallic paint; pearl paint. Pu Tongqi would not have said, resin, pigments and additives. Metallic aluminum powder more; it looks after the completion of light. Pearl paint it, to join the cloud masterbatch. Mica is a thin piece of something, therefore, reflective directional, there is a colorful effect. If the varnish layer with metallic paint, car paint looks very bright, very pretty. Color on it, white is undoubtedly the cheapest. Analogy, a world-class brand of red pigment titanium dioxide than the world-class brand about 25 times as expensive; and white paint in the amount of titanium dioxide pigment is a red 5 times. Therefore, the red paint used in the cost of color higher than the 5 times that of white paint. That is why some cars made as few color varieties: simple, and low cost.
No matter what color of paint, its color will fade in the sun all the. In fact, not only paint, any color of the stuff under the sun may be fading. Then, paint additives which increase how very important. Such as light stabilizer, such as antioxidant or something. Unfortunately, a good additive expensive expensive. Many times, additives, good or bad decision to give the feel of this paint how. It would certainly think that some kind of 2 years on the paint began to fade significantly more than 5 years still bright as new paint bad. But no, no fading of paint. Many times, the factory is more concerned about is: fade evenly. Try not to make cars appear different parts of color.
Hand car, most likely damage is to paint the. Car wash are not careful, the paint will be injured. In fact, even in the production line installed anything, things have damaged the paint.
Generally small scratches, paint the surface of wounds, scar whitening. That is the paint surface of the shaving. There is no need to touch-up painting. Light, playing with sand or wax to play a few times more wax. Heavy, then it can be a polishing up.
More serious, can see the color of the lower primer (many times, primer is dark color). So, please look at the site about injuries. In general, bumpers, mirrors and some car wheel eyebrow these areas are engineering plastics. Will not rust. Actually, I'm a big addition to an ugly problem. Do not fill back up paint does not matter. The other, it should be up painting, and otherwise, even a very small damage, steel will start to rust, and by then, even up painting embroidered difficult to prevent.
Up painting it, or recommend to a special shop to overhaul plant or Training.
First, all the places, even in the original, well after the truck-mounted, touch-up painting will not use any "original paint!" If the repair shop tells you they use the "original paint", then you must be kidding. The reason is simple: original painting technique mentioned above, when I was a good spray paint later, with the baking temperature of 200 degrees. The finished car so many parts, the number of ability does the temperature of 200 degrees? Is then split light vehicles, only vehicles shell?
Up painting all with specialized refinishing. Refinish the baking temperature is low, like 7.80 degrees.
Second, the patch repair paint colors are out before the deployment. Reason is simple: Your car may be opened for several years, the paint has begun to fade, although you can not tell. If you stop outside, a different direction will be slightly different degree of fading – the relationship between sunlight. To color match the original as possible, only the current transfer. Also, color does not appear to as much as possible, even if you just need a little touch-up painting, the factory will re-spray the entire piece of all. For example, there is a room for the door up, then, to prevent the strips for the sector, the semi-fan, or half of all jet fans. Thus, if there is a small little color they will not see it.
I am China Manufacturers writer, reports some information about mouse laser presenter , laser aimer.
Processing your request, Please wait....
