What to do with automobile battery with no power
You will get some useful information if you usually pay attention to your lovely car. When you found the automobile battery’s power decreased, take measures in time, such as battery replacement, or reserving new battery in the car. If the car is out of service suddenly in the halfway, you can take the emergency measure.
The common emergency measure is to push the car. First of all, pay attention to the ground and observe if it is suitable for pushing the car. We can speed up with the help of downhill path. If the front is upward slope path, we should turn the car to downhill for pushing. Don’t do that when there are many cars and pedestrians. Turn on the ignition switch before you push the car. When it get a certain speed, switch the transmission to second block, then quickly loose the clutch pedal and put on stream. Once the engine is started, we should quickly depress the clutch pedal and control the accelerator not to let the engine misses, then stop it slowly.
Pushing for starting a car is very widely used when the automobile battery has no power. But this is just one way that we have to do. It should not be used usually, because it has a certain damage for the engine and clutch. In addition, this way needs more than two persons. If there is just the driver, it is hard to use this method. So we need to adopt other ways.
Another way is to contact the breakdown lorry. Connect the jumper cable to charge it for a short time through the breakdown lorry, then start the engine. This is a right way. The car owners should prepare a jumper cable for emergency charging if there is no way to charge it when it has no power. How should we charge the automobile battery with the jumper cable? Just close the distance of two cars till the jumper cable is enough to connect the positive and negative between two automobile batteries. Pay attention to two cars without any contact. If it is not convenient to connect for the battery installation position, you should use the tools to remove the automobile battery.
Then ensure the positive and negative. First connect the positive of battery with no power to the other battery, then connect the negative of breakdown lorry’s battery to the metal of car engine that has no power. Don’t mistake its positive and negative. Do ensure its reliable connection. When you connect the jumper cable, start the engine of breakdown lorry, and speed up for about 5 minutes, then it will charge the battery with no power. After charging it, you should remove the cable as the opposite order of connection.
Processing your request, Please wait....
