Learn To Build Home Solar Power Panels
The growing concerns over exhaustion of conventional energy sources like petrol and diesel has given rise to alternative ways of producing energy. The first and foremost to be considered in this energy is solar energy or solar power. You can now build home solar power within your convenience. However, the required knowledge about tapping solar energy by installing panels is needed. Information about building this is available extensively online, as there are many websites that encourages this.
Finding the Best Panel: Your first step towards learning how to tap solar energy is to know about panel requirements. There are several companies that offer solar panels for competitive prices. The one you should buy depends upon your needs. If you are planning to power your entire home, then extra large panels is needed and this can cost you a little more.
DIY Solar Panels: If you are seeking much cheaper options, then you can build solar panels at home with your own knowledge. There are websites that offer you complete knowledge about building solar panels through Do-It-Yourself or DIY kits. Such kits are capable of producing 63 watts of power in general.
Purchase Solar Cells: The heat received from will be converted into energy by solar cells. These are independent units that collectively form a solar panel. The number of these you buy depends upon your requirement. Presently, you can place an order online or even purchase at any of the local solar stores. For instance, you can get those that are of 6 inches in size if you would like to produce 1.75 watts of power from it.
Building the Panel: After you are decided about the number of cells needed, you can continue with the most important task and that is of building the solar panel. Now, carefully cut the panel to place solar cells. Leaving some space for aluminum frame is advisable. You need to cut acrylic sheets accordingly for covering the panel.
Connect Solar Cells: Arrange solar cells in a vertical order to check whether they fit into the panel exactly. Now, join them with one another through the contact points provided. Solder the ends properly to secure the joints. You need to check whether the ends of one cell are making proper contact with the ends of the other cell or not.
Test your Solar Cells: It is important that you test the working of solar cells after you join them. If the number of columns is increased, then you should ensure that the output produced by each cell on an average should be 1.75 watts. Insulating them with silicon and then placing them on the acrylic sheet will complete the arrangement part.
Connecting the Solar Panel: After all the solar cells are placed accordingly, you need to establish a common connection. You will require bus wires and tab wire for this purpose. Solder other contact points and apply silicon for protective reasons. This will complete the construction and connection processes. Drill holes wherever needed after you place acrylic sheet and aluminum frame. Seal the outer edges to make your solar panel waterproof. You can build home solar power cheaply through this process.
Are you looking to find where you can learn more about how to Build Home Solar Power? Visit my website to find out more!
So what are you hesitating? Visit my website to find out how you can find the best deal on where you can Build Home Solar Power for your home needs.
Processing your request, Please wait....
