Athletic shoes’ maintenance explanation and matters needing attention
Regular cleaning shoes, gently wipe with a damp cloth (be careful not to use too much water), dirt and more places to squeeze some toothpaste on it, and then clean the brush, cleaning should be upper dry, do not brush fierce brush. Shoes to avoid flooding, exposure, and roasted, so as to avoid deformation and upper broken shoes. Avoid contact with shoes, acids, alkalis, oil, corrosive solvents. Can be replaced to maintain more than two pairs of shoes, so shoes turns off. Note specifically dedicated to shoes, canvas shoes, casual shoes, sandals should not do strenuous exercise, indoor sports shoes are not allowed to do strenuous exercise outdoors.
1, when the shoes wear dirty, scrub gently with water dipped in detergent, then rinse thoroughly with water, place a dry cool air, avoid direct sunlight. Never use dry heat or open flame to avoid aging, a plastic, fading and serious deformation. Excessive direct sunlight, heat and hairdryer are inappropriate methods of care will reduce the life of the shoes; washing could not be a long soak, soaking time generally should not exceed 20 minutes. Real leather is not soaked in water;
2, nike air max sport shoes most of the raw material is a synthetic polymer materials (mostly non-woven polyester mesh and nylon-based artificial leather, shoes and more use made of rubber or foam rubber), some uppers leather, so avoid contact with fats and oils of organic reagents and solutions, but also not in high temperature environment for a long time wear. Normal wear or washing at a temperature not higher than 45 degrees Celsius;
3, if long term storage, should be first shoes scrub clean, dry, cool and ventilated storage place, so that the shoes have sufficient time to dry to avoid mildew. Real leather is best to use shoes or shoe care hold up ball of paper in order to avoid serious distortion. Shoe soles will head down toward the wall, ventilated place to dry at room temperature, immersed in water so as to prevent the end of foam material; (because foaming material is not easy to do, therefore do not recommend flat shoes wet.)
4, for the use of shoes look more beautiful, we use some reflective material in the printing process, or eager. Please wear or wash in the process of brush or not to use too much force strong, but can not pull the nails or sharp edges of these parts of the printing pattern. In the wear period of time, the surface of some patterns may be some small cracks (in particular, often tortuous parts), which are a normal phenomenon;
5, to enable you to achieve a satisfactory effect of wearing, please fair treat you wear shoes. Remember not to wear normal running shoes or walking shoes for soccer and other strenuous exercise. To give full play to the competitive strengths of your, my company at the same time the professional sports according to the characteristics of the design and manufacture a variety of special shoes for you to choose, but any kind of athletic shoe with a sharp object can not touch;
6, a day training athletes, the best preparations for more than two pairs of shoes to replace every day;
7, athletes or sports enthusiasts should always wear shoes purchased. In order to extend the life of shoes, wash as little as possible;
8, running on the nylon mesh fabric and man-made tanning are relatively easy care, hand wash with water, it is best not to use washing machines to wash or water immersion;
9, separated from the shoes and laces with neutral soap / washing powder. Shoe insoles wash out, gently scrub with a soft brush, and finally rinse.
Processing your request, Please wait....
