Just What Are Mig Mag Welders?
If perhaps you were within the metal working or building industry for just about any length of time, you will likely have been exposed to something referred to as a mig mag welder. Mig mag welders are not as advanced and complicated to comprehend as the title may make you believe. Here’s how it goes:
Mig mag welders really are a kind of gas metal arc welding devices. Mig is short for metal inert gas. Mag symbolizes metal active gas. Mig mag welders are actually two different kinds of welder which were misnomered into one.
Gas metal arc welding was first designed for welding aluminium along with other non-ferrous metals. It spread into the steel industry as it’s a quicker way of welding. Sadly, inert gasses can very expensive and this limited the usage of mig mag welders in more compact steel working workshops. Gas welding is currently mostly completed with semi-inert gasses like carbon dioxide. Nonetheless it has not faded into obscurity.
Because mig mag welders do not need or even just work with a shielding gas, it is not often utilized outside or even in places that the air flow may abruptly change.
The operating of mig mag welders isn’t too tricky when handling basic metals including steel. The weld quality will invariably fluctuate considering that the excellence of the weld is dependant, not merely on the experience of the user doing the welding, but on the ecological conditions too. The trick to a good weld is to keep your process regular and precise. This obviously becomes simpler with practice, but practice may be expensive. If particular parameters aren’t recognized, gas and electrodes could be wasted and they’re expensive to restore. The more ferrous a metal, the more complicated it is to keep the weld from becoming porous. This takes place if a metal cools faster than gas bubbles created in the welding process can get away. It helps to weld with a slower rate if you are dealing with a metal like aluminium which cools very fast.
As with all welding, you will need to possess the correct protective clothing in place when working mig mag welders. The right clothing incorporates heavy leather gloves and also protective jacket sleeves and also protective eye wear. An ailment called arc eye is a type of affliction of mig mag welders that do not wear the right eye protection. It’s caused by the ultraviolet light that’s emitted whenever welding is performed and results in the cornea in the eye to get inflamed, and in extreme cases, the retina may become burned. Curtains made of pvc can be put in place to protect the other people in the room form the ultraviolet light emitted by the welding process. Another thing to bear in mind is that you are working with a dangerous gas. It is important to make sure that there is enough ventilation in the area you are working in.
Always take care when welding and be sure you know what you’re doing and you are wearing the proper protective clothing to prevent burns and arc eye.
For more information about mig mag welders visit the website http://www.goscorarc.co.za
Processing your request, Please wait....
