Looking at Computer Motherboard Parts
The motherboard is truly the heart of every computer. Without it, a fully functional computer is impossible. All the other vital pieces of the computer connect to it in order to make every component functional. For you to understanding the components of a motherboard, it’s critical to understand first the key pieces contained in it. Be guided with the following list of motherboard parts which can be found in a typical computer today.
The CPU Socket
The CPU socket is the place where one or more microprocessors may be installed. There are lots of different kinds of sockets around, but in general only 2 are really used. These two sockets are used by Intel and AMD for PGA and LGA. Whenever PGA is used the Cpu will have to have pins that go into the socket’s holes, but when LGA is used then pins aren’t required as it will just rest on the socket. Since the processor socket is attached to a PCB, it’s mainly intended to house the processor from other parts of the motherboard. Other than its primary function, the Cpu socket also serves other functions such as providing a structure for the CPU’s support, aiding replacement, supporting the heatsink and also forming an electrical connection for the PCB and CPU.
The Memory Slots
Another term for memory slot is memory bank. It is designed for RAM modules and each RAM must be compatible with the motherboard used. On average, there are two to four memory slots and the most popular kinds include single and dual-channel technology. The single channel technology uses one to three RAM modules to be able to perform flawlessly. Alternatively, the dual-channel technology will need to utilize more than one slot or else the module will lose its strength. Therefore, no less than two slots with the same kind of module, with the same memory capacity and the same manufacturer should be used. To illustrate, if 1 GB memory capacity is desired, two 512 MB modules from the same technology type and manufacturer are important for completely functional module strength.
The SATA and ATA Interface Connectors
There have been plenty of interface standards made in the past couple of years though the most crucial two are the SATA and ATA interfaces. The ATA interface is the same as IDE. It mostly connects hard and optical drives where by 2 hard drives may be placed on one ribbon so as to support the majority of modern day hard drive storage sizes. Alternatively, SATA is the newer interface commonly used in the majority of computers these days. It is faster than ATA and it only needs one device attachment. Its cables are also thin which helps in a speedier cooling process in the computer.
Main Power Connector
The power connector is very important as it’s the passageway for the power supply essential for efficient motherboard performance. There are two styles of main power connectors: the 20 pins + 4 pins and the 24 pins. Due to this, incompatibilities are a possibility since not all power supplies have the two kinds of main power connectors, so it should be significantly considered.
The Peripherals
The peripherals in the computer are integrated all together. It normally includes nonvolatile memory chip for the system’s BIOS, a chipset forming the front side bus, peripheral buses and main memory, expanded card slot, power connections, clock generator, sockets, primary memory slot, and sound card. On more recent motherboards, more peripherals are incorporated since integrated circuits have low costs as well as sizes that can create efficient and cost-effective computer systems.
More specific motherboard elements may be learned from comprehensive guides about understanding motherboards. Just pay attention to every part in order to learn everything properly.
Now that you understand all about the different motherboard parts, you need to start looking for the top motherboard for your planned application. Get it here www.TheComputerHardwareBlog.com
Processing your request, Please wait....
