How to Pickle a Stainless Steel Pipe
Pickling involves a process which removes impurities, such as baked-on dirt or rust, from iron, aluminum or copper alloys. Some Stainless Steel Pipe products also shine the surface to create a polished look. If you would like to pickle stainless steel, you have a wide variety of choices in the method you may use, since stainless steel doesn’t rust. Using a pickling cream, you may pickle a steel pipe without much hassle or the need for dismantling and expensive equipment.Wait for the metal to cool down to at most 104 degreesFahrenheit before you begin working if you recently have done any welding on the metal segment you want to pickle.
Shake the container with pickling cream for about 30 seconds to ensure that you get the best balance in your blend.There are a wide variety of pipe materials currently available, including PVC, copper, aluminum and stainless steel. Stainless steel pipes are used in construction; the food, pharmaceutical, petrochemical and automotive industries; and for municipal and decorative purposes. Depending on the diameter of the pipe, the wall thickness can vary greatly. Thin-walled pipes can be cut using a simple handsaw, but a thick pipe requires the use of specialized tools.
Dip a nylon brush into the container with pickling cream and start painting the cream onto the surface of your steel pipe.Set the toothed edge of the saw blade on the dotted line with the saw parallel to the floor. Pull the saw’s trigger slightly to start the blade moving slowly. Keep the saw blade aligned with the dotted line as you cut. Stop cutting if the stainless steel starts to glow a dull orange.Slide one end of a half-round file into the cut end of the stainless steel exhaust. Push the file around the inside of the pipe to remove the burr left from the reciprocating saw. Slide the flat side of file around the outside of the cut to smooth the outer edge.
Leave the surface alone for the amount of time specified on the pickling cream container to allow the cream to settle.There are a wide variety of Stainless Steel Pipe materials currently available, including PVC, copper, aluminum and stainless steel. Stainless steel pipes are used in construction; the food, pharmaceutical, petrochemical and automotive industries; and for municipal and decorative purposes. Depending on the diameter of the pipe, the wall thickness can vary greatly. Thin-walled pipes can be cut using a simple handsaw, but a thick pipe requires the use of specialized tools.Rinse the cream off with regular tap water. Higher water pressure gives you better results.
Processing your request, Please wait....
