Staining Wood Furniture
Staining wood furniture is comparatively simple to do as long as you’ve properly prepared the wood surface. A wood stain soaks right into the fibers of the wood but provides no protection so it should be finished. There are numerous varieties of stains out there just like oil, spirit, water and acrylic.
The kind of stain you use will depend on the wood, the finish you want to attain and your experience in staining wood furniture. For example, spirit stains dry extremely quickly so it could be hard to get even coverage. Many newbies end up with darker patches of overlapping color which is not quite the look they wished to achieve. Water stains can just be used as soon as the wood has first been sanded down.
Staining allows you to color the furniture piece any colour you wish as you may mix and match compatible stains and dyes. You’ll seal an oil stain using sanding sealer before applying varnish. Never use a spirit stain if you plan to use French polish on the piece of furniture. If using water or acrylic stains you must allow them to dry properly. This means leaving the piece for a minimum of forty eight hours. Otherwise when you apply the sealant, you can get a white haze effect on the wood. Always test on an inconspicuous spot first before using the sealant to the whole unit.
Be careful when staining wood furniture, specifically if you wish to stain furniture darker because the wet stain would always look darker than the dried finish. You do not need to use more than 2 coats since it could become patchy. You have to try to get as good a match to the shade you want to achieve as possible the very first time round.
Staining wood furniture takes time and patience however the finished results will be worth it.
Find out more about staining wood furniture from an enthusiast who’s been working with it for more than ten years! Check us out at http://www.bare-wood-furniture.com/staining-wood-furniture/!
Processing your request, Please wait....
