Different types of sheet metal Advantages and Disadvantages of calibration equip
Auto sheet metal repair operations have been gradually promising, various Vehicle Maintenance 4S shop, Comprehensive repair shop have increased in the sheet metal repair business investment, with a variety of Maintenance equipment And high-tech talent to make their own in the fierce competition in place. Talent recruitment for the trial of the method by merit. However, maintenance of equipment for sheet metal body and the most important beam Calibrator It is impossible to try the method to choose. This requires the purchase of all forms before the beam calibrator body and depth of understanding to choose their own products.
Different types of sheet metal Advantages and Disadvantages of calibration equipment
Example: when the vehicle is serious damage, the body as a whole is almost entirely smash, a serious distortion floor, the sides, car roof, engine compartment cover and the trunk lid barely a good place, judged Body as a whole can not be repaired, it can according to user needs replacement vehicle body. Removed all the bad car assembly and parts available, engine and other major assemblies for a comprehensive inspection and repair. Change with the new car body assembly and the need to replace all the parts, vehicle assembly process in accordance with re-assembly. Body of the replacement cost and the assembly of the replacement cost very high, even up to half the cost of buying a new car. Therefore, an auto repair shop will use Modern Of advanced high-quality equipment to repair damaged vehicles, to return to the original quality standards. Sheet metal damage to the vehicle master will select the most appropriate maintenance equipment: the first use of "self-made gantry" has been completely unable to meet the quality standards are car repair, vehicle maintenance had not been all manufacturers to use; "to gossip" only with stretch, as a small car accident tools can not easily stretch this type of accident vehicles to ensure quality of service. So that we can only choose the body and the beam calibrator or body and the beam correction center.
Present, Market The calibration apparatus is divided into a variety of styles, the more prominent are divided into three types: the traditional frame, platform, new frame with a positioning fixture. No matter what style will both have the following characteristics: high strength body positioning and fixtures. Different shapes and functions have more pull with the maintenance, repair to meet the needs of different parts. Able to multi-point, drawing a full range of correction work. Can be accurately measured and accurately detect the amount of deviation from the reference point and repair the error.
Traditional "frame" the more prominent advantages are: small bench area of small, mobile and flexible, low cost, suitable for small repair shop. But it also has its shortcomings. That is, the clamping of vehicles is too much trouble, need lifting equipment to vehicles, lift, and then smooth on the correction of clamping apparatus, with the Rata is not easy to turn the table at random, not easy to lock the position, to bring operational inconvenience. Drawing force have arrived at the same time contribute to consumption, making tension strong enough, only four general the big clamp to a fixed body, the skirt skirts damaged or no traditional vertical clamping the accident vehicle can not maintain, nor to the major solid accurate vehicle maintenance, not equipped with measuring scale can not be measured on the body and chassis, can not determine the quality of the accident to repair;
I am an expert from China Quality Dress, usually analyzes all kind of industries situation, such as tracker boat seats , digital magnetic compass.
Processing your request, Please wait....
