Textile enterprises into the car of the textile market you Know?
Car Textile Products include we can see the cushions, mats, car carpet, Car decoration Cloth, cloth seats, seat belts, car soft headliner, etc., but it is not easy to see include: airbags, Tire With a cord so. Textiles used in every car in the 20-25 kg, while the greater the amount of buses, so a huge amount of automotive textiles. With the development of China's auto industry, automotive textile consumption is also growing year by year.
China's textile products manufacturers, hoping to enter the field of automotive textiles, but the auto industry is more specific, the relevant parts so demanding, and the requirements of different manufacturers are not the same. Therefore, as the cross-industry product standards, as the enterprises to enter the field of high threshold. I consulted the relevant countries, both inside and outside testing agencies, only a few of the 12 SGS and other testing organizations, to master the relevant standards at home and abroad, and can provide detection.
Expert, said: At present, domestic and automotive textiles are mainly related to the following standards:
1, the national compulsory standard GB8410-2006 Automotive Interior Combustion characteristics of materials.
Standard specifies the level of combustion characteristics of automotive interior materials, technical requirements and test methods. This standard applies to the level of automotive interior materials, Evaluation of combustion characteristics. In view of the actual situation of automotive interior parts (parts application area, layout method, use, ignition sources, etc.) and the standard test conditions specified in a number of differences between, the standard does not apply to evaluation of automotive interior materials of all real combustion car.
2, GB14166-2003 adult occupants of motor vehicle safety belts and restraint systems
Standard specifies Seat belt And the definition of constraint system, technical requirements and test methods, suitable for installation in the M and N class car, and by the crew prior to the adult equipment, used alone as an independent seat belts and restraint systems.
3, QB/T2971-2008 car decoration Sheep Shearing Product
Standard specifies a car decoration products with the Sheep Shearing product classification, requirements, test methods, inspection rules, and packaging, marking, transportation and storage. This standard applies to automotive products, decorative Sheep Shearing. This standard also applies to cars and other decorative fur products.
4, FZ/T34008-2009 linen cushion vehicle
Standard specifies vehicle Flax Cushion Technical requirements, test methods, inspection rules, marking, packaging and transportation. This standard applies Ingredients flax fiber content of 50% or more of the machine code, hand seat.
On the international standards and requirements, the experts said that foreign automobile industry developed earlier, and our country is different. Foreign manufacturers usually have their own standards and test methods are different. Such as automotive interior textiles wear, anti-pilling, pilling, sun color fastness, low temperature environment, such as tensile breaking strength rope, the detection method is very special requirements of the manufacturers are not the same. Compared to common requirements such as flame retardant, require lower than 4 inches / minute.
Car textiles included we can see the seat, floor mats, car carpets, car upholstery, seat fabrics, seat belts, car soft headliner, etc., but it is not easy to see include: airbags , tire cord fabric, etc.. Textiles used in every car in the 20-25 kg, while the greater the amount of buses, so a huge amount of automotive textiles. With the development of China's auto industry, automotive textile consumption is also growing year by year.
China's textile products manufacturers, hoping to enter the field of automotive textiles, but the auto industry is more specific, the relevant parts so demanding, and the requirements of different manufacturers are not the same. Therefore, as the cross-industry product standards, became the enterprises to enter this area of the high threshold. I consulted the relevant countries, both inside and outside testing agencies, only a few of the 12 SGS and other testing organizations, to master the relevant domestic and international standards and to provide testing.
Europe and America are mainly related to the following standards:
1, U.S.: FMVSS302 Federal Motor Vehicle Safety Standard 302
This standard specifies the level of combustion characteristics of automotive interior materials, technical requirements and test methods for automotive interior materials, the assessment of horizontal burning characteristics.
2, EU :95-28-EC motor vehicle (car) the internal structure of the combustion properties of test materials
EU material standard vehicle fire test method mainly uses the U.S. Federal Motor Vehicle Safety Standards (FMVSS) and some EU national standards. For the entire automobile industry, fire test methods used are FMVSS302.
In addition, the French standards NFP92-505 (drip test) was also a small flame propagation test, similar to ENISO11925-2. It is, in some automotive applications as a complementary test method FMVSS302.
Tourist areas such as the EU Passenger Cars Decoration Materials, other, travel buses curtain materials must also meet ISO6940 standards.
Expert cautions, manufacturers also should pay attention to VOC (volatile organic compounds VolatileOrganic Compounds abbreviation) request the release, which is mandatory in the European Union.
I am an expert from China Products, usually analyzes all kind of industries situation, such as used densitometer , hemodialyzer.
Processing your request, Please wait....
