Prevent Internet Protocol (IP) Spoofing
Web protocol spoofing which is commonly known as ip spoofing is a ploy used by an attacker to make customers think that the packets they are using come from a trustworthy source. The attacker creates ip packets with a counterfeit ip address that a customer after uses without figuring out that they are not from a trustworthy machine. Spoofing comes in many types such as blind spoofing, denial-of-service attack and non-blind spoofing. Attackers usually use this trick to hide where a computer is connecting from or which computer is accessing the network. Different people have different reasons as to why they would want to spoof the network. Some of the reasons could be for criminal activities or to visit websites that have morally unacceptable content. Ip spoofing exposes one to loss of sensitive information or even damage to the overall network.
There are numerous ways to prevent ip spoofing. The initially method that you can use is to do away with host based network authentications. Host based authentication uses a public host key for authentication which is highly susceptible to hacking. So instead you need to use network encryption for authentication. In encrypted networks, it is hard for an attacker to hack into your network because it only sends encrypted packets over the network.
You could also use ingress filtering technique to rid your network from ip spoofing attacks. In this technique, all packets originating from a source outside the network are filtered at the gateway of the network with a source address within the network to confirm that they come from a legitimate source. If the packets are illegitimate they are blocked from your network.
You could also use engress filtering method to safeguard your network from theses attacks. In engress filtering, all packets originating from within the network are blocked from inside the network using a source address that is outside the network. They are scanned via a courser or firewall and the packets that seem suspicious are with held. The method is effective in preventing an attacker within your network who could be filtering from launching his or her ip spoofing attack against an external machine. Usually ingress filtering is used together with engress filtering.
The other way to prevent ip spoofing is configuration of your coursers and Knobs. This is done to make them support a sure configuration such that they will not accept packets that come from outside your local network and claim to have originated from within. You could also allow encryption sessions on the router that you are using so that trustworthy hosts outside your network can securely communicate with your local hosts. Use of authentication key exchange amongst machines on your network can substantially reduce spoofing attacks.
Using the reverse path forwarding ip verify technique you can prevent ip spoofing. In this method the reverse path forwarding takes the source of an IP address of a packet that is received from outside the network and appears up to confirm if the directr has a course in its table that can be used to reply to that packet. If none is found on the routing table, it is assumed that the packet has been spoofed and the directr drops the packet quickly.
Raymond Newson specializes in writing and advising people on VPN technologies. By visiting his website VPNreviewz.com you can learn about best proxy service and best vpn service providers.
Processing your request, Please wait....
