Choosing The Best Type Of Oil For Your Car
Sometimes you wonder, perhaps, what does15W-40 mean in terms of the oil for your vehicle and why it is better during the summer than 15W-30. The answer to all the similar questions will be presented to you in the following lines, as hinted by oil, Queens County NY professionals.
First of all, let’s start with a little bit of history. In the very beginning, there was no way to describe the ability of lubricating oil to reach the operating temperature of 100 ° C. It was found that the oil viscosity is directly proportional to that temperature: a thicker oil lubrication have a good factor. This is where the point the Society of Automotive Engineers was founded and set the standards that are used even nowadays. For example, if the oil drain time is between 5 seconds and 14 seconds, it is SAE viscosity grade 10 and so on up to SAE 50.
You perhaps now wonder why you need all the information from oil, Queens County NY experts and what do you do for choosing the best type of oil for your car. Here, are some tips you will need to consider when making your decision:
– The motor oil ideal for use in normal engine temperature is SAE 30. If using thinner oil like SAE 20, you might experience problems with your engine due to lower viscosity, fuel economy and slightly more power than normal.
– If using thicker oil, the phenomenon is the opposite: a slight increase in consumption and a decrease in oil consumption.
If your vehicle operating temperature is higher than normal, you should consider increasing the value of the oil parameter you are using.
And finally, oil, Queens County NY experts believe it is crucial for every driver to be aware of the classification of the oils that can be used for their cars. Here is what you need to know in this matter:
SA – For very old engines without performance requirements. Used only when specifically required by the manufacturer.
SB – For very old engine. Used only when specifically required by the manufacturer.
SC – For engines manufactured until 1967.
SD – For engines manufactured until 1971.
SE – For engines manufactured until 1979.
SF – for gasoline engines manufactured after 1980, until 1989.
SG – For engines manufactured after 1980 until 1993 inclusive. It is recommended for petrol cars and vans. Additive higher compared with SF.
SH – For engines manufactured until 1996 inclusive. Available since 1993, contains a quality assurance system in comparison with SG provides more severe oil properties.
SJ – For all engines used today. It was introduced in API rankings after 1996. Is more effective than SH in terms of high-temperature oxidation stability, compatibility with the catalyst and low foaming.
SL – was introduced from July 2001. Standard still in force.
SM – the highest class performance for gasoline engines by API classification. It was introduced in November 2004. For all engines currently performing.
If you are searching for your car the best ,oil, Queens County NY area? You can get in touch with OSI Comfort Specialists.
Processing your request, Please wait....
