How To Fix Blue Screen Of Death Safely
If you are used to handle a computer system regularly, there is a possibility you may have to experience a blue screen crash. This malfunction of the system is also called a STOP Error. Such an error appears when a matter on the system is too serious, for which the window must stop instantaneously. Generally, the blue screen of death is related to the hardware or the driver related to the system. Most of the BSODs show STOP code that assists to figure out the original cause of the blue screen crash. Well, if this happens with your system too, you must know in advance how to how to fix blue screen of death safely. If you know the process, you can do it at home without any assistance of technician.
The main factor you need to see while you try fix blue screen death is whether the PC restarts after the BSOD message. To explain this, if the blue screen flashes and the computer system reboots automatically before going through the instructions properly, you need to scan the system to detect virus if any. You can relax to learn that troubleshooting blue screen is not rocket science. Following some simple steps would make the job done. If you know how to fix the blue screen of death you can handle the error easily and mend the system without much difficulty. While you try to troubleshoot blue screen, you should know beforehand the process might take up to few hours to get troubleshot directly.
The first easy step while you try for blue screen of death fix, is to think for a while about what your last command was. Have you updated a driver recently, or installed a new program or any hardware just now? If so, there is a high possibility that the BSOD error flashed occurred due to any malfunction due to the installation or updating of any new program. If this is the case, undo the command and check whether the BSOD error appears again. You have a few choices over here. First, you can startup using the last known configuration to undo the latest registrations and changes. Secondly, you can restore the system for undoing the last system changes made. Finally, you can roll back the device driver to the version that existed before to the update.
When you know how to fix blue screen, you must make sure that a certain percentage of free space is available on the Windows partition. Blue screen software of any such matters, like data corruption might occur if there is not sufficient space on the primary partition that is generally used for the Windows operating system. If nothing works properly, you can replace the hardware, update the firmware of the hardware, and ensure that the particular hardware is on the hardware compatibility list.
Processing your request, Please wait....
