Easy Steps To Finish A Portland Drywall Task
One may become involved in a Portland drywall project where they tear out the walls in their homes and have to replace them with new one. This can happen for a variety of reasons like having water damage, doing a renovation project, or adding on a room. There are steps to take to make sure they can get this done efficiently and make it look good.
One can prepare themselves by getting everything together that they will need to get the work completed. One needs to have the drywall they will need, screws and nails to adhere the sheets to the studs, finishing material to make sure that everything looks good, and paint to finish the project after the walls are installed.
The next step is determining just how much of the items one needs to purchase. To do this properly measurements should be taken of the space that will be built. Gypsum sheets usually come in sizes of eight feet by four feet. One should have enough sheets available to complete the job. The way to measure is to take the height of wall and the width and times the two. This will give the person the square footage they will need.
When the measurement of the entire area to be built is done that will want to determine the how many square feet this turns out to be. The size of the sheet is divided into the number from the area to derive at the number of boards one should purchase. One can gather from this information the amount of other supplies that will be required to install and finish the work.
Once the above task is completed the installation can begin. One should start with putting the board up on the ceiling. In most cases this will prove to be the hardest part of the job. It is made even more difficult because the board is heavy and it is very hard to hold it up alone. One may need to get someone to help them or they can build a device to help hold up the sheets.
The walls are done after the ceiling has been hung. Most times one will have to cut boards to fit into spaces and gaps. It is very important to take exact measurements so that material is used efficiently and none is wasted. There will be work that has to be done on the edges and where the fasteners are placed into the board.
The mud is used to smooth out the edges and indents. This is applied and allowed to dry. When dried it can be sanded down to a smooth finish. This step might have to be repeated as the mud will crack if it is applied too thick. Once the desired finish is achieved a coating a paint can be applied to complete the project.
A Portland drywall job requires a knowledge of tools and methods. There are people who can do these projects themselves and do good work. However, if one is not comfortable in performing these tasks, they might want to consult a professional experienced in this field.
Complete projects in your business or home using portland drywall quickly and easily if you have the right information. For help from the professionals, contact http://www.westsidedrywallportland.com/showcase/our-services/7557 now.
Processing your request, Please wait....
