How To Fix Broken Springs

Broken springs on a garage door can happen at almost any time. Sometimes a spring might break during the process of opening or closing, but most of the time, it simply gives into the pressure when nothing else is happening. If anyone is home, they may hear a loud noise, but the break is often unnoticed until the next time an occupant attempts to open a door.

Manufacturers use a spring to counterbalance the weight of a door. The spring is tightly wound or stretched and loosened as a door opens or closes. When operating correctly, people are able to open a door weighing 300 pounds or more manually with little force. When attached to a garage door opener, very little force is needed to operate the door.

The initial problem is often getting the car out of the garage. Even if a spring is not functioning, doors can be opened manually, provided there is enough strength lifting. If an automatic opener is attached, pull the red handle to disengage the opener. It may take the help of an additional person or two to lift the door. If you lose your hand hold do not attempt to catch the falling unit with a foot or other body part.

In many older homes, an extension spring is used to provide the counterbalance. Look for these devices at the side of the tracks that hold the rollers. When a door opens, the devices retract. Usually they are installed in sets of two, with one spring on either side of the tracks.

Torsion springs are located parallel to the top of the garage opening. These units are tightly wound to provide the force to lift the door. The tension stores energy needed to lift the door weight.

Both types of units provide enough force to balance the door at any point along its journey. The 300 pound garage door requires very little force to operate if the spring is intact. If the spring breaks, it is still possible to open the unit manually, but it usually takes a large among of force to move the door.

While consumers may find replacement parts needed to make the repairs at home improvement or hardware stores, they should think twice before making the decision to make this repair on their own. The forces used to wind the spring to the correct tension are quite large. If accidentally released, the spring can cause physical injuries. Most homeowners should leave the job to the professionals.

If one does choose to do the job for himself, proceed with caution. Take time to research the process and pay close attention to the dangers. Take time to read and follow printed instructions supplied with the replacement part.

Broken springs on a garage door can make life difficult. While it is possible to open a door and remove your car before the repair is made, the task can be difficult. A garage door repair company can replace the spring so the door is easy to open once again.

For excellent tips on how to replace broken springs Dallas homeowners can visit our site, now. You will also get details about the advantages of using the services of garage door repair specialist at http://www.gdsgaragedoorservicedallas.com/showcase/services/7370 today.

Processing your request, Please wait....

Leave a Reply